WiFi fails with 18.04.2 upgradeMy wireless/WiFi connection does not work. What information is needed to diagnose the issue?Internet connection drops out after 1-2 hours (RTL8821AE wifi drivers)WiFi unstable after 17.10 updateUbuntu 14.04 wireless network not workingWifi connectivity issue in Ubuntu 16.04Can't connect to wifi with BCM43142WiFi problem on lenovo E520 ubuntu 18.04.1
Conveying the idea of "tricky"
Subassembly identification
Why are there never-ending wars in the Middle East?
Modeling the Round (Nearest Integer) function
How to avoid that customers come to local shop to get advice and then buy online?
Was Hitler exclaiming "Heil Hitler!" himself when saluting?
What do you do when brand new pads are rubbing on new rotor? It smokes and smells so bad and it seems like it is going to catch on fire
Did Bobby Fischer actually write "Bobby Fischer Teaches Chess"
What exactly is meant by "partial function" in functional programming?
Stamp of electrical department on letter head of recommendation letter
Are translation journals still a thing any more?
Why didn't Petunia know that Harry wasn't supposed to use magic out of school?
How do I redirect a subdomain with a wildcard?
Repair drywall and protect wires on back of electrical panel
Automatically creating table with borders
Implementation of A* algorithm in C++
Do I need a visa for Japan as a New Zealand Citizen?
How would a race of humanoids with tails design [vehicle] seats?
What is the white square near the viewfinder of the Fujica GW690?
Do any languages mark social distinctions other than gender and status?
Which person is telling the truth?
Would fantasy dwarves be able to invent and/or manufacture the radio?
Why apt asking to uninstall GIMP when installing ardour?
Why the service --status-all is not listing this working service?
WiFi fails with 18.04.2 upgrade
My wireless/WiFi connection does not work. What information is needed to diagnose the issue?Internet connection drops out after 1-2 hours (RTL8821AE wifi drivers)WiFi unstable after 17.10 updateUbuntu 14.04 wireless network not workingWifi connectivity issue in Ubuntu 16.04Can't connect to wifi with BCM43142WiFi problem on lenovo E520 ubuntu 18.04.1
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty
margin-bottom:0;
Yesterday my laptop (ASUS E200HA) was upgraded to 18.04.2, but now the WiFi doesn't work. I've tried following just about every instruction for 10 hours now and still no joy. Bluetooth works, which is how I'm connected just now.
wilbur@wilbur-E200HA:~$ rfkill list all
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
wilbur@wilbur-E200HA:~$
wilbur@wilbur-E200HA:~$ sudo lspci -knn | grep Net -A3
01:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter [168c:0042] (rev 31)
Subsystem: AzureWave QCA9377 802.11ac Wireless Network Adapter [1a3b:2b31]
Kernel driver in use: ath10k_pci
Kernel modules: ath10k_pci
wilbur@wilbur-E200HA:~$
wilbur@wilbur-E200HA:~$ sudo lshw -C network
*-network
description: Network controller
product: QCA9377 802.11ac Wireless Network Adapter
vendor: Qualcomm Atheros
physical id: 0
bus info: pci@0000:01:00.0
version: 31
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=ath10k_pci latency=0
resources: irq:126 memory:91200000-913fffff
*-network
description: Ethernet interface
physical id: 1
logical name: bnep0
serial: f0:03:8c:a2:28:58
capabilities: ethernet physical
configuration: broadcast=yes ip=172.20.10.5 multicast=yes
wilbur@wilbur-E200HA:~$
ilbur@wilbur-E200HA:~$ wget -N -t 5 -T 10 https://github.com/UbuntuForums/wireless-info/raw/master/wireless-info &&
chmod +x wireless-info &&
./wireless-info
--2019-05-28 23:33:05-- https://github.com/UbuntuForums/wireless-info/raw/master/wireless-info
Resolving github.com (github.com)... 140.82.118.4, 64:ff9b::8c52:7603
Connecting to github.com (github.com)|140.82.118.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://raw.githubusercontent.com/UbuntuForums/wireless-info/master/wireless-info [following]
--2019-05-28 23:33:07-- https://raw.githubusercontent.com/UbuntuForums/wireless-info/master/wireless-info
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.60.133, 64:ff9b::9765:3c85
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.60.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 17452 (17K) [text/plain]
Saving to: ‘wireless-info’
wireless-info 100%[=================================================================>] 17.04K 15.9KB/s in 1.1s
Last-modified header missing -- time-stamps turned off.
2019-05-28 23:33:09 (15.9 KB/s) - ‘wireless-info’ saved [17452/17452]
Results saved in "/home/wilbur/wireless-info.txt".
Results also archived in "/home/wilbur/wireless-info.tar.gz", as they exceed the 19.5 kB size limit for ".txt" attachments on the Ubuntu Forums.
wilbur@wilbur-E200HA:~$
#### wireless info START
Report from: 28 May 2019 23:33 BST +0100
Booted last: 28 May 2019 00:00 BST +0100
Script from: 22 Oct 2018 03:34 UTC +0000
release
Distributor ID: Ubuntu
Description: Ubuntu 18.04.2 LTS
Release: 18.04
Codename: bionic
kernel
Linux 4.16.0+ #1 SMP Mon Apr 2 16:37:34 CEST 2018 x86_64 x86_64 x86_64 GNU/Linux
Parameters: ro, quiet, splash, vt.handoff=1
desktop
Ubuntu
lspci
01:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter [168c:0042] (rev 31)
Subsystem: AzureWave QCA9377 802.11ac Wireless Network Adapter [1a3b:2b31]
Kernel driver in use: ath10k_pci
lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 13d3:3496 IMC Networks
Bus 001 Device 002: ID 0bda:57ed Realtek Semiconductor Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
PCMCIA card info
rfkill
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
secure boot
SecureBoot disabled
Platform is in Setup Mode
lsmod
asus_nb_wmi 28672 0
asus_wmi 28672 1 asus_nb_wmi
sparse_keymap 16384 1 asus_wmi
ath10k_pci 49152 0
ath10k_core 368640 1 ath10k_pci
ath 28672 1 ath10k_core
mac80211 778240 1 ath10k_core
cfg80211 626688 3 mac80211,ath,ath10k_core
wmi 24576 1 asus_wmi
video 40960 3 asus_wmi,int3406_thermal,i915
interfaces
[/etc/network/interfaces]
auto lo
iface lo inet loopback
ifconfig
1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback brd
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: bnep0: mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000
link/ether brd
inet 172.20.10.5/28 brd 172.20.10.15 scope global dynamic noprefixroute bnep0
valid_lft 78767sec preferred_lft 78767sec
inet6 fe80::9fdd:81cf:7b9c:d633/64 scope link noprefixroute
valid_lft forever preferred_lft forever
iwconfig
lo no wireless extensions.
bnep0 no wireless extensions.
route
default via 172.20.10.1 dev bnep0 proto dhcp metric 750
169.254.0.0/16 dev bnep0 scope link metric 1000
172.20.10.0/28 dev bnep0 proto kernel scope link src 172.20.10.5 metric 750
resolv.conf
[777 root '/etc/resolv.conf' -> '../run/resolvconf/resolv.conf']
nameserver 127.0.0.53
network managers
Installed:
NetworkManager
Running:
root 792 1 0 21:39 ? 00:00:01 /usr/sbin/NetworkManager --no-daemon
NetworkManager info
GENERAL.DEVICE:
GENERAL.TYPE: bt
GENERAL.NM-TYPE: NMDeviceBt
GENERAL.VENDOR: --
GENERAL.PRODUCT: --
GENERAL.DRIVER: bluez
GENERAL.DRIVER-VERSION: --
GENERAL.FIRMWARE-VERSION: --
GENERAL.HWADDR:
GENERAL.MTU: 1500
GENERAL.STATE: 100 (connected)
GENERAL.REASON: 0 (No reason given)
GENERAL.UDI: /org/bluez/hci0/dev_80_82_23_4F_5C_C2
GENERAL.IP-IFACE: bnep0
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: Ian’s iPhone Network
GENERAL.CON-UUID: 249c8e9b-a032-476d-a939-857f8c8e49b0
GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/1
GENERAL.METERED: no (guessed)
CAPABILITIES.CARRIER-DETECT: no
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
CAPABILITIES.SRIOV: no
IP4.ADDRESS1: 172.20.10.5/28
IP4.GATEWAY: 172.20.10.1
IP4.ROUTE1: dst = 0.0.0.0/0, nh = 172.20.10.1, mt = 750
IP4.ROUTE[2]: dst = 172.20.10.0/28, nh = 0.0.0.0, mt = 750
IP4.ROUTE[3]: dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
IP4.DNS1: 172.20.10.1
DHCP4.OPTION1: requested_domain_search = 1
DHCP4.OPTION[2]: server_name = Ians-iPhone
DHCP4.OPTION[3]: requested_broadcast_address = 1
DHCP4.OPTION[4]: requested_domain_name = 1
DHCP4.OPTION[5]: requested_rfc3442_classless_static_routes = 1
DHCP4.OPTION[6]: requested_time_offset = 1
DHCP4.OPTION[7]: requested_wpad = 1
DHCP4.OPTION[8]: requested_netbios_scope = 1
DHCP4.OPTION[9]: next_server = 172.20.10.1
DHCP4.OPTION[10]: broadcast_address = 172.20.10.15
DHCP4.OPTION[11]: dhcp_message_type = 5
DHCP4.OPTION[12]: requested_interface_mtu = 1
DHCP4.OPTION[13]: dhcp_lease_time = 85536
DHCP4.OPTION[14]: routers = 172.20.10.1
DHCP4.OPTION[15]: ip_address = 172.20.10.5
DHCP4.OPTION[16]: subnet_mask = 255.255.255.240
DHCP4.OPTION[17]: expiry = 1559161556
DHCP4.OPTION[18]: requested_subnet_mask = 1
DHCP4.OPTION[19]: requested_static_routes = 1
DHCP4.OPTION[20]: requested_ntp_servers = 1
DHCP4.OPTION[21]: domain_name_servers = 172.20.10.1
DHCP4.OPTION[22]: requested_netbios_name_servers = 1
DHCP4.OPTION[23]: requested_ms_classless_static_routes = 1
DHCP4.OPTION[24]: requested_routers = 1
DHCP4.OPTION[25]: requested_domain_name_servers = 1
DHCP4.OPTION[26]: network_number = 172.20.10.0
DHCP4.OPTION[27]: requested_host_name = 1
DHCP4.OPTION[28]: dhcp_server_identifier = 172.20.10.1
IP6.ADDRESS1: fe80::9fdd:81cf:7b9c:d633/64
IP6.GATEWAY: --
IP6.ROUTE1: dst = ff00::/8, nh = ::, mt = 256, table=255
IP6.ROUTE[2]: dst = fe80::/64, nh = ::, mt = 256
IP6.ROUTE[3]: dst = fe80::/64, nh = ::, mt = 750
BLUETOOTH.CAPABILITIES: NAP
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/15
CONNECTIONS.AVAILABLE-CONNECTIONS1: 249c8e9b-a032-476d-a939-857f8c8e49b0 | Ian’s iPhone Network
GENERAL.DEVICE:
GENERAL.TYPE: bt
GENERAL.NM-TYPE: NMDeviceBt
GENERAL.VENDOR: --
GENERAL.PRODUCT: --
GENERAL.DRIVER: bluez
GENERAL.DRIVER-VERSION: --
GENERAL.FIRMWARE-VERSION: --
GENERAL.HWADDR:
GENERAL.MTU: 0
GENERAL.STATE: 30 (disconnected)
GENERAL.REASON: 0 (No reason given)
GENERAL.UDI: /org/bluez/hci0/dev_78_C3_E9_83_F1_DD
GENERAL.IP-IFACE: --
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: --
GENERAL.CON-UUID: --
GENERAL.CON-PATH: --
GENERAL.METERED: unknown
CAPABILITIES.CARRIER-DETECT: no
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
CAPABILITIES.SRIOV: no
BLUETOOTH.CAPABILITIES: NAP
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/14
CONNECTIONS.AVAILABLE-CONNECTIONS1: f3267832-b90a-4cbf-bd86-86d4c9a1929b | Galaxy J5 Network
NetworkManager.state
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
NetworkManager config
[[/etc/NetworkManager/conf.d/default-wifi-powersave-on.conf]]
[connection]
wifi.powersave = 3
[[/etc/NetworkManager/NetworkManager.conf]]
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=false
[device]
wifi.scan-rand-mac-address=no
[[/usr/lib/NetworkManager/conf.d/10-dns-resolved.conf]]
[main]
dns=systemd-resolved
[[/usr/lib/NetworkManager/conf.d/10-globally-managed-devices.conf]]
[keyfile]
unmanaged-devices=*,except:type:wifi,except:type:wwan
[[/usr/lib/NetworkManager/conf.d/20-connectivity-ubuntu.conf]]
[connectivity]
uri=http://connectivity-check.ubuntu.com/
[[/usr/lib/NetworkManager/conf.d/no-mac-addr-change.conf]]
[device-mac-addr-change-wifi]
match-device=driver:rtl8723bs,driver:rtl8189es,driver:r8188eu,driver:8188eu,driver:eagle_sdio,driver:wl
wifi.scan-rand-mac-address=no
wifi.cloned-mac-address=preserve
ethernet.cloned-mac-address=preserve
NetworkManager profiles
[[/etc/NetworkManager/system-connections/HolidayInnGuestWi-Fi]] (600 root)
[connection] id=HolidayInnGuestWi-Fi | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=HolidayInnGuestWi-Fi
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Ian’s iPhone]] (600 root)
[connection] id=Ian’s iPhone | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=73;97;110;226;128;153;115;32;105;80;104;111;110;101;
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/ZyXELEA57DC]] (600 root)
[connection] id=ZyXELEA57DC | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=ZyXELEA57DC
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/SWR WiFi]] (600 root)
[connection] id=SWR WiFi | type=wifi | autoconnect=false | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=SWR WiFi
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Private Guest]] (600 root)
[connection] id=Private Guest | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=Private Guest
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/ZyXELEA57DC_5G]] (600 root)
[connection] id=ZyXELEA57DC_5G | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=ZyXELEA57DC_5G
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/iPhone]] (600 root)
[connection] id=iPhone | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=iPhone
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/77X_Guest]] (600 root)
[connection] id=77X_Guest | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=77X_Guest
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/DIO-WIFI]] (600 root)
[connection] id=DIO-WIFI | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=DIO-WIFI
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/RSMS_Guest]] (600 root)
[connection] id=RSMS_Guest | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=RSMS_Guest
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/PlusnetWireless2B7338]] (600 root)
[connection] id=PlusnetWireless2B7338 | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=PlusnetWireless2B7338
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Sagemcom-QR6Q78]] (600 root)
[connection] id=Sagemcom-QR6Q78 | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=Sagemcom-QR6Q78
[ipv4] method=auto
[ipv6] method=auto
Netplan config
iw reg get
Region: Europe/London (based on set time zone)
global
country 00: DFS-UNSET
(2402 - 2472 @ 40), (N/A, 20), (N/A)
(2457 - 2482 @ 20), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, PASSIVE-SCAN
(5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW, PASSIVE-SCAN
(5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, PASSIVE-SCAN
(5735 - 5835 @ 80), (N/A, 20), (N/A), PASSIVE-SCAN
(57240 - 63720 @ 2160), (N/A, 0), (N/A)
iwlist channels
lo no frequency information.
bnep0 no frequency information.
iwlist scan
lo Interface doesn't support scanning.
bnep0 Interface doesn't support scanning.
module infos
[ath10k_pci]
filename: /lib/modules/4.16.0+/kernel/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
firmware: ath10k/QCA9377/hw1.0/board.bin
firmware: ath10k/QCA9377/hw1.0/firmware-5.bin
firmware: ath10k/QCA6174/hw3.0/board-2.bin
firmware: ath10k/QCA6174/hw3.0/board.bin
firmware: ath10k/QCA6174/hw3.0/firmware-6.bin
firmware: ath10k/QCA6174/hw3.0/firmware-5.bin
firmware: ath10k/QCA6174/hw3.0/firmware-4.bin
firmware: ath10k/QCA6174/hw2.1/board-2.bin
firmware: ath10k/QCA6174/hw2.1/board.bin
firmware: ath10k/QCA6174/hw2.1/firmware-5.bin
firmware: ath10k/QCA6174/hw2.1/firmware-4.bin
firmware: ath10k/QCA9887/hw1.0/board-2.bin
firmware: ath10k/QCA9887/hw1.0/board.bin
firmware: ath10k/QCA9887/hw1.0/firmware-5.bin
firmware: ath10k/QCA988X/hw2.0/board-2.bin
firmware: ath10k/QCA988X/hw2.0/board.bin
firmware: ath10k/QCA988X/hw2.0/firmware-5.bin
firmware: ath10k/QCA988X/hw2.0/firmware-4.bin
firmware: ath10k/QCA988X/hw2.0/firmware-3.bin
firmware: ath10k/QCA988X/hw2.0/firmware-2.bin
license: Dual BSD/GPL
description: Driver support for Qualcomm Atheros 802.11ac WLAN PCIe/AHB devices
author: Qualcomm Atheros
srcversion: 228292A42E3072B9E09755C
depends: ath10k_core
retpoline: Y
intree: Y
name: ath10k_pci
vermagic: 4.16.0+ SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: irq_mode:0: auto, 1: legacy, 2: msi (default: 0) (uint)
parm: reset_mode:0: auto, 1: warm only (default: 0) (uint)
[ath10k_core]
filename: /lib/modules/4.16.0+/kernel/drivers/net/wireless/ath/ath10k/ath10k_core.ko
license: Dual BSD/GPL
description: Core module for Qualcomm Atheros 802.11ac wireless LAN cards.
author: Qualcomm Atheros
srcversion: D96CC39234307CA4276A7C8
depends: mac80211,cfg80211,ath
retpoline: Y
intree: Y
name: ath10k_core
vermagic: 4.16.0+ SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: debug_mask:Debugging mask (uint)
parm: uart_print:Uart target debugging (bool)
parm: skip_otp:Skip otp failure for calibration in testmode (bool)
parm: cryptmode:Crypto mode: 0-hardware, 1-software (uint)
parm: rawmode:Use raw 802.11 frame datapath (bool)
parm: coredump_mask:Bitfield of what to include in firmware crash file (ulong)
[ath]
filename: /lib/modules/4.16.0+/kernel/drivers/net/wireless/ath/ath.ko
license: Dual BSD/GPL
description: Shared library for Atheros wireless LAN cards.
author: Atheros Communications
srcversion: 555BBBB9D4FCA58A05E7C0D
depends: cfg80211
retpoline: Y
intree: Y
name: ath
vermagic: 4.16.0+ SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
[mac80211]
filename: /lib/modules/4.16.0+/kernel/net/mac80211/mac80211.ko
license: GPL
description: IEEE 802.11 subsystem
srcversion: 8FA1436C1506A22E399CDBE
depends: cfg80211
retpoline: Y
intree: Y
name: mac80211
vermagic: 4.16.0+ SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm: max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm: max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm: beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm: probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
[cfg80211]
filename: /lib/modules/4.16.0+/kernel/net/wireless/cfg80211.ko
description: wireless configuration support
license: GPL
author: Johannes Berg
srcversion: 2443BFD11787A6D4458157B
depends:
retpoline: Y
intree: Y
name: cfg80211
vermagic: 4.16.0+ SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
module parameters
[ath10k_pci]
irq_mode: 0
reset_mode: 0
[ath10k_core]
coredump_mask: 3
cryptmode: 0
debug_mask: 0
rawmode: N
skip_otp: N
uart_print: N
[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
minstrel_vht_only: Y
probe_wait_ms: 500
[cfg80211]
bss_entries_limit: 1000
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00
/etc/modules
modprobe options
[/etc/modprobe.d/amd64-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci
[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac
[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off
[/etc/modprobe.d/intel-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod)
&& /sbin/modprobe -r mac80211
[/etc/modprobe.d/rtl8723de.conf]
options rtl8723de ant_sel=X
rc.local
grep: /etc/rc.local: No such file or directory
pm-utils
udev rules
dmesg
#### wireless info END
wilbur@wilbur-E200HA:~$ sudo lspci -v
[sudo] password for wilbur:
...
01:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31)
Subsystem: AzureWave QCA9377 802.11ac Wireless Network Adapter
Flags: bus master, fast devsel, latency 0, IRQ 127
Memory at 91200000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit-
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [148] Virtual Channel
Capabilities: [168] Device Serial Number 00-00-00-00-00-00-00-00
Capabilities: [178] Latency Tolerance Reporting
Capabilities: [180] L1 PM Substates
Kernel driver in use: ath10k_pci
Kernel modules: ath10k_pci
wilbur@wilbur-E200HA:~$
wireless upgrade
|
show 2 more comments
Yesterday my laptop (ASUS E200HA) was upgraded to 18.04.2, but now the WiFi doesn't work. I've tried following just about every instruction for 10 hours now and still no joy. Bluetooth works, which is how I'm connected just now.
wilbur@wilbur-E200HA:~$ rfkill list all
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
wilbur@wilbur-E200HA:~$
wilbur@wilbur-E200HA:~$ sudo lspci -knn | grep Net -A3
01:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter [168c:0042] (rev 31)
Subsystem: AzureWave QCA9377 802.11ac Wireless Network Adapter [1a3b:2b31]
Kernel driver in use: ath10k_pci
Kernel modules: ath10k_pci
wilbur@wilbur-E200HA:~$
wilbur@wilbur-E200HA:~$ sudo lshw -C network
*-network
description: Network controller
product: QCA9377 802.11ac Wireless Network Adapter
vendor: Qualcomm Atheros
physical id: 0
bus info: pci@0000:01:00.0
version: 31
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=ath10k_pci latency=0
resources: irq:126 memory:91200000-913fffff
*-network
description: Ethernet interface
physical id: 1
logical name: bnep0
serial: f0:03:8c:a2:28:58
capabilities: ethernet physical
configuration: broadcast=yes ip=172.20.10.5 multicast=yes
wilbur@wilbur-E200HA:~$
ilbur@wilbur-E200HA:~$ wget -N -t 5 -T 10 https://github.com/UbuntuForums/wireless-info/raw/master/wireless-info &&
chmod +x wireless-info &&
./wireless-info
--2019-05-28 23:33:05-- https://github.com/UbuntuForums/wireless-info/raw/master/wireless-info
Resolving github.com (github.com)... 140.82.118.4, 64:ff9b::8c52:7603
Connecting to github.com (github.com)|140.82.118.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://raw.githubusercontent.com/UbuntuForums/wireless-info/master/wireless-info [following]
--2019-05-28 23:33:07-- https://raw.githubusercontent.com/UbuntuForums/wireless-info/master/wireless-info
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.60.133, 64:ff9b::9765:3c85
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.60.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 17452 (17K) [text/plain]
Saving to: ‘wireless-info’
wireless-info 100%[=================================================================>] 17.04K 15.9KB/s in 1.1s
Last-modified header missing -- time-stamps turned off.
2019-05-28 23:33:09 (15.9 KB/s) - ‘wireless-info’ saved [17452/17452]
Results saved in "/home/wilbur/wireless-info.txt".
Results also archived in "/home/wilbur/wireless-info.tar.gz", as they exceed the 19.5 kB size limit for ".txt" attachments on the Ubuntu Forums.
wilbur@wilbur-E200HA:~$
#### wireless info START
Report from: 28 May 2019 23:33 BST +0100
Booted last: 28 May 2019 00:00 BST +0100
Script from: 22 Oct 2018 03:34 UTC +0000
release
Distributor ID: Ubuntu
Description: Ubuntu 18.04.2 LTS
Release: 18.04
Codename: bionic
kernel
Linux 4.16.0+ #1 SMP Mon Apr 2 16:37:34 CEST 2018 x86_64 x86_64 x86_64 GNU/Linux
Parameters: ro, quiet, splash, vt.handoff=1
desktop
Ubuntu
lspci
01:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter [168c:0042] (rev 31)
Subsystem: AzureWave QCA9377 802.11ac Wireless Network Adapter [1a3b:2b31]
Kernel driver in use: ath10k_pci
lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 13d3:3496 IMC Networks
Bus 001 Device 002: ID 0bda:57ed Realtek Semiconductor Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
PCMCIA card info
rfkill
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
secure boot
SecureBoot disabled
Platform is in Setup Mode
lsmod
asus_nb_wmi 28672 0
asus_wmi 28672 1 asus_nb_wmi
sparse_keymap 16384 1 asus_wmi
ath10k_pci 49152 0
ath10k_core 368640 1 ath10k_pci
ath 28672 1 ath10k_core
mac80211 778240 1 ath10k_core
cfg80211 626688 3 mac80211,ath,ath10k_core
wmi 24576 1 asus_wmi
video 40960 3 asus_wmi,int3406_thermal,i915
interfaces
[/etc/network/interfaces]
auto lo
iface lo inet loopback
ifconfig
1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback brd
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: bnep0: mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000
link/ether brd
inet 172.20.10.5/28 brd 172.20.10.15 scope global dynamic noprefixroute bnep0
valid_lft 78767sec preferred_lft 78767sec
inet6 fe80::9fdd:81cf:7b9c:d633/64 scope link noprefixroute
valid_lft forever preferred_lft forever
iwconfig
lo no wireless extensions.
bnep0 no wireless extensions.
route
default via 172.20.10.1 dev bnep0 proto dhcp metric 750
169.254.0.0/16 dev bnep0 scope link metric 1000
172.20.10.0/28 dev bnep0 proto kernel scope link src 172.20.10.5 metric 750
resolv.conf
[777 root '/etc/resolv.conf' -> '../run/resolvconf/resolv.conf']
nameserver 127.0.0.53
network managers
Installed:
NetworkManager
Running:
root 792 1 0 21:39 ? 00:00:01 /usr/sbin/NetworkManager --no-daemon
NetworkManager info
GENERAL.DEVICE:
GENERAL.TYPE: bt
GENERAL.NM-TYPE: NMDeviceBt
GENERAL.VENDOR: --
GENERAL.PRODUCT: --
GENERAL.DRIVER: bluez
GENERAL.DRIVER-VERSION: --
GENERAL.FIRMWARE-VERSION: --
GENERAL.HWADDR:
GENERAL.MTU: 1500
GENERAL.STATE: 100 (connected)
GENERAL.REASON: 0 (No reason given)
GENERAL.UDI: /org/bluez/hci0/dev_80_82_23_4F_5C_C2
GENERAL.IP-IFACE: bnep0
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: Ian’s iPhone Network
GENERAL.CON-UUID: 249c8e9b-a032-476d-a939-857f8c8e49b0
GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/1
GENERAL.METERED: no (guessed)
CAPABILITIES.CARRIER-DETECT: no
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
CAPABILITIES.SRIOV: no
IP4.ADDRESS1: 172.20.10.5/28
IP4.GATEWAY: 172.20.10.1
IP4.ROUTE1: dst = 0.0.0.0/0, nh = 172.20.10.1, mt = 750
IP4.ROUTE[2]: dst = 172.20.10.0/28, nh = 0.0.0.0, mt = 750
IP4.ROUTE[3]: dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
IP4.DNS1: 172.20.10.1
DHCP4.OPTION1: requested_domain_search = 1
DHCP4.OPTION[2]: server_name = Ians-iPhone
DHCP4.OPTION[3]: requested_broadcast_address = 1
DHCP4.OPTION[4]: requested_domain_name = 1
DHCP4.OPTION[5]: requested_rfc3442_classless_static_routes = 1
DHCP4.OPTION[6]: requested_time_offset = 1
DHCP4.OPTION[7]: requested_wpad = 1
DHCP4.OPTION[8]: requested_netbios_scope = 1
DHCP4.OPTION[9]: next_server = 172.20.10.1
DHCP4.OPTION[10]: broadcast_address = 172.20.10.15
DHCP4.OPTION[11]: dhcp_message_type = 5
DHCP4.OPTION[12]: requested_interface_mtu = 1
DHCP4.OPTION[13]: dhcp_lease_time = 85536
DHCP4.OPTION[14]: routers = 172.20.10.1
DHCP4.OPTION[15]: ip_address = 172.20.10.5
DHCP4.OPTION[16]: subnet_mask = 255.255.255.240
DHCP4.OPTION[17]: expiry = 1559161556
DHCP4.OPTION[18]: requested_subnet_mask = 1
DHCP4.OPTION[19]: requested_static_routes = 1
DHCP4.OPTION[20]: requested_ntp_servers = 1
DHCP4.OPTION[21]: domain_name_servers = 172.20.10.1
DHCP4.OPTION[22]: requested_netbios_name_servers = 1
DHCP4.OPTION[23]: requested_ms_classless_static_routes = 1
DHCP4.OPTION[24]: requested_routers = 1
DHCP4.OPTION[25]: requested_domain_name_servers = 1
DHCP4.OPTION[26]: network_number = 172.20.10.0
DHCP4.OPTION[27]: requested_host_name = 1
DHCP4.OPTION[28]: dhcp_server_identifier = 172.20.10.1
IP6.ADDRESS1: fe80::9fdd:81cf:7b9c:d633/64
IP6.GATEWAY: --
IP6.ROUTE1: dst = ff00::/8, nh = ::, mt = 256, table=255
IP6.ROUTE[2]: dst = fe80::/64, nh = ::, mt = 256
IP6.ROUTE[3]: dst = fe80::/64, nh = ::, mt = 750
BLUETOOTH.CAPABILITIES: NAP
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/15
CONNECTIONS.AVAILABLE-CONNECTIONS1: 249c8e9b-a032-476d-a939-857f8c8e49b0 | Ian’s iPhone Network
GENERAL.DEVICE:
GENERAL.TYPE: bt
GENERAL.NM-TYPE: NMDeviceBt
GENERAL.VENDOR: --
GENERAL.PRODUCT: --
GENERAL.DRIVER: bluez
GENERAL.DRIVER-VERSION: --
GENERAL.FIRMWARE-VERSION: --
GENERAL.HWADDR:
GENERAL.MTU: 0
GENERAL.STATE: 30 (disconnected)
GENERAL.REASON: 0 (No reason given)
GENERAL.UDI: /org/bluez/hci0/dev_78_C3_E9_83_F1_DD
GENERAL.IP-IFACE: --
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: --
GENERAL.CON-UUID: --
GENERAL.CON-PATH: --
GENERAL.METERED: unknown
CAPABILITIES.CARRIER-DETECT: no
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
CAPABILITIES.SRIOV: no
BLUETOOTH.CAPABILITIES: NAP
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/14
CONNECTIONS.AVAILABLE-CONNECTIONS1: f3267832-b90a-4cbf-bd86-86d4c9a1929b | Galaxy J5 Network
NetworkManager.state
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
NetworkManager config
[[/etc/NetworkManager/conf.d/default-wifi-powersave-on.conf]]
[connection]
wifi.powersave = 3
[[/etc/NetworkManager/NetworkManager.conf]]
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=false
[device]
wifi.scan-rand-mac-address=no
[[/usr/lib/NetworkManager/conf.d/10-dns-resolved.conf]]
[main]
dns=systemd-resolved
[[/usr/lib/NetworkManager/conf.d/10-globally-managed-devices.conf]]
[keyfile]
unmanaged-devices=*,except:type:wifi,except:type:wwan
[[/usr/lib/NetworkManager/conf.d/20-connectivity-ubuntu.conf]]
[connectivity]
uri=http://connectivity-check.ubuntu.com/
[[/usr/lib/NetworkManager/conf.d/no-mac-addr-change.conf]]
[device-mac-addr-change-wifi]
match-device=driver:rtl8723bs,driver:rtl8189es,driver:r8188eu,driver:8188eu,driver:eagle_sdio,driver:wl
wifi.scan-rand-mac-address=no
wifi.cloned-mac-address=preserve
ethernet.cloned-mac-address=preserve
NetworkManager profiles
[[/etc/NetworkManager/system-connections/HolidayInnGuestWi-Fi]] (600 root)
[connection] id=HolidayInnGuestWi-Fi | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=HolidayInnGuestWi-Fi
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Ian’s iPhone]] (600 root)
[connection] id=Ian’s iPhone | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=73;97;110;226;128;153;115;32;105;80;104;111;110;101;
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/ZyXELEA57DC]] (600 root)
[connection] id=ZyXELEA57DC | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=ZyXELEA57DC
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/SWR WiFi]] (600 root)
[connection] id=SWR WiFi | type=wifi | autoconnect=false | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=SWR WiFi
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Private Guest]] (600 root)
[connection] id=Private Guest | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=Private Guest
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/ZyXELEA57DC_5G]] (600 root)
[connection] id=ZyXELEA57DC_5G | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=ZyXELEA57DC_5G
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/iPhone]] (600 root)
[connection] id=iPhone | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=iPhone
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/77X_Guest]] (600 root)
[connection] id=77X_Guest | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=77X_Guest
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/DIO-WIFI]] (600 root)
[connection] id=DIO-WIFI | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=DIO-WIFI
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/RSMS_Guest]] (600 root)
[connection] id=RSMS_Guest | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=RSMS_Guest
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/PlusnetWireless2B7338]] (600 root)
[connection] id=PlusnetWireless2B7338 | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=PlusnetWireless2B7338
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Sagemcom-QR6Q78]] (600 root)
[connection] id=Sagemcom-QR6Q78 | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=Sagemcom-QR6Q78
[ipv4] method=auto
[ipv6] method=auto
Netplan config
iw reg get
Region: Europe/London (based on set time zone)
global
country 00: DFS-UNSET
(2402 - 2472 @ 40), (N/A, 20), (N/A)
(2457 - 2482 @ 20), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, PASSIVE-SCAN
(5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW, PASSIVE-SCAN
(5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, PASSIVE-SCAN
(5735 - 5835 @ 80), (N/A, 20), (N/A), PASSIVE-SCAN
(57240 - 63720 @ 2160), (N/A, 0), (N/A)
iwlist channels
lo no frequency information.
bnep0 no frequency information.
iwlist scan
lo Interface doesn't support scanning.
bnep0 Interface doesn't support scanning.
module infos
[ath10k_pci]
filename: /lib/modules/4.16.0+/kernel/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
firmware: ath10k/QCA9377/hw1.0/board.bin
firmware: ath10k/QCA9377/hw1.0/firmware-5.bin
firmware: ath10k/QCA6174/hw3.0/board-2.bin
firmware: ath10k/QCA6174/hw3.0/board.bin
firmware: ath10k/QCA6174/hw3.0/firmware-6.bin
firmware: ath10k/QCA6174/hw3.0/firmware-5.bin
firmware: ath10k/QCA6174/hw3.0/firmware-4.bin
firmware: ath10k/QCA6174/hw2.1/board-2.bin
firmware: ath10k/QCA6174/hw2.1/board.bin
firmware: ath10k/QCA6174/hw2.1/firmware-5.bin
firmware: ath10k/QCA6174/hw2.1/firmware-4.bin
firmware: ath10k/QCA9887/hw1.0/board-2.bin
firmware: ath10k/QCA9887/hw1.0/board.bin
firmware: ath10k/QCA9887/hw1.0/firmware-5.bin
firmware: ath10k/QCA988X/hw2.0/board-2.bin
firmware: ath10k/QCA988X/hw2.0/board.bin
firmware: ath10k/QCA988X/hw2.0/firmware-5.bin
firmware: ath10k/QCA988X/hw2.0/firmware-4.bin
firmware: ath10k/QCA988X/hw2.0/firmware-3.bin
firmware: ath10k/QCA988X/hw2.0/firmware-2.bin
license: Dual BSD/GPL
description: Driver support for Qualcomm Atheros 802.11ac WLAN PCIe/AHB devices
author: Qualcomm Atheros
srcversion: 228292A42E3072B9E09755C
depends: ath10k_core
retpoline: Y
intree: Y
name: ath10k_pci
vermagic: 4.16.0+ SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: irq_mode:0: auto, 1: legacy, 2: msi (default: 0) (uint)
parm: reset_mode:0: auto, 1: warm only (default: 0) (uint)
[ath10k_core]
filename: /lib/modules/4.16.0+/kernel/drivers/net/wireless/ath/ath10k/ath10k_core.ko
license: Dual BSD/GPL
description: Core module for Qualcomm Atheros 802.11ac wireless LAN cards.
author: Qualcomm Atheros
srcversion: D96CC39234307CA4276A7C8
depends: mac80211,cfg80211,ath
retpoline: Y
intree: Y
name: ath10k_core
vermagic: 4.16.0+ SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: debug_mask:Debugging mask (uint)
parm: uart_print:Uart target debugging (bool)
parm: skip_otp:Skip otp failure for calibration in testmode (bool)
parm: cryptmode:Crypto mode: 0-hardware, 1-software (uint)
parm: rawmode:Use raw 802.11 frame datapath (bool)
parm: coredump_mask:Bitfield of what to include in firmware crash file (ulong)
[ath]
filename: /lib/modules/4.16.0+/kernel/drivers/net/wireless/ath/ath.ko
license: Dual BSD/GPL
description: Shared library for Atheros wireless LAN cards.
author: Atheros Communications
srcversion: 555BBBB9D4FCA58A05E7C0D
depends: cfg80211
retpoline: Y
intree: Y
name: ath
vermagic: 4.16.0+ SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
[mac80211]
filename: /lib/modules/4.16.0+/kernel/net/mac80211/mac80211.ko
license: GPL
description: IEEE 802.11 subsystem
srcversion: 8FA1436C1506A22E399CDBE
depends: cfg80211
retpoline: Y
intree: Y
name: mac80211
vermagic: 4.16.0+ SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm: max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm: max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm: beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm: probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
[cfg80211]
filename: /lib/modules/4.16.0+/kernel/net/wireless/cfg80211.ko
description: wireless configuration support
license: GPL
author: Johannes Berg
srcversion: 2443BFD11787A6D4458157B
depends:
retpoline: Y
intree: Y
name: cfg80211
vermagic: 4.16.0+ SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
module parameters
[ath10k_pci]
irq_mode: 0
reset_mode: 0
[ath10k_core]
coredump_mask: 3
cryptmode: 0
debug_mask: 0
rawmode: N
skip_otp: N
uart_print: N
[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
minstrel_vht_only: Y
probe_wait_ms: 500
[cfg80211]
bss_entries_limit: 1000
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00
/etc/modules
modprobe options
[/etc/modprobe.d/amd64-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci
[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac
[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off
[/etc/modprobe.d/intel-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod)
&& /sbin/modprobe -r mac80211
[/etc/modprobe.d/rtl8723de.conf]
options rtl8723de ant_sel=X
rc.local
grep: /etc/rc.local: No such file or directory
pm-utils
udev rules
dmesg
#### wireless info END
wilbur@wilbur-E200HA:~$ sudo lspci -v
[sudo] password for wilbur:
...
01:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31)
Subsystem: AzureWave QCA9377 802.11ac Wireless Network Adapter
Flags: bus master, fast devsel, latency 0, IRQ 127
Memory at 91200000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit-
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [148] Virtual Channel
Capabilities: [168] Device Serial Number 00-00-00-00-00-00-00-00
Capabilities: [178] Latency Tolerance Reporting
Capabilities: [180] L1 PM Substates
Kernel driver in use: ath10k_pci
Kernel modules: ath10k_pci
wilbur@wilbur-E200HA:~$
wireless upgrade
See askubuntu.com/questions/425155/… and edit your post to include wireless script results
– Jeremy31
May 28 at 22:27
Thanks, have done that (see above).
– Wilbur_E200H
May 28 at 22:35
Another whole day trying to resolve this - is there another update coming out to correct the last update? I'm so fed up with this I'm on the verge of going back to Mint :(
– Wilbur_E200H
May 29 at 22:42
trysudo sed -i 's/3/2/' /etc/NetworkManager/conf.d/*
and reboot, wifi power management might be causing the driver to crash
– Jeremy31
May 29 at 22:59
Thanks @Jeremy31 tried that but sadly no joy. Still no wifi adapter found.
– Wilbur_E200H
May 30 at 6:38
|
show 2 more comments
Yesterday my laptop (ASUS E200HA) was upgraded to 18.04.2, but now the WiFi doesn't work. I've tried following just about every instruction for 10 hours now and still no joy. Bluetooth works, which is how I'm connected just now.
wilbur@wilbur-E200HA:~$ rfkill list all
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
wilbur@wilbur-E200HA:~$
wilbur@wilbur-E200HA:~$ sudo lspci -knn | grep Net -A3
01:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter [168c:0042] (rev 31)
Subsystem: AzureWave QCA9377 802.11ac Wireless Network Adapter [1a3b:2b31]
Kernel driver in use: ath10k_pci
Kernel modules: ath10k_pci
wilbur@wilbur-E200HA:~$
wilbur@wilbur-E200HA:~$ sudo lshw -C network
*-network
description: Network controller
product: QCA9377 802.11ac Wireless Network Adapter
vendor: Qualcomm Atheros
physical id: 0
bus info: pci@0000:01:00.0
version: 31
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=ath10k_pci latency=0
resources: irq:126 memory:91200000-913fffff
*-network
description: Ethernet interface
physical id: 1
logical name: bnep0
serial: f0:03:8c:a2:28:58
capabilities: ethernet physical
configuration: broadcast=yes ip=172.20.10.5 multicast=yes
wilbur@wilbur-E200HA:~$
ilbur@wilbur-E200HA:~$ wget -N -t 5 -T 10 https://github.com/UbuntuForums/wireless-info/raw/master/wireless-info &&
chmod +x wireless-info &&
./wireless-info
--2019-05-28 23:33:05-- https://github.com/UbuntuForums/wireless-info/raw/master/wireless-info
Resolving github.com (github.com)... 140.82.118.4, 64:ff9b::8c52:7603
Connecting to github.com (github.com)|140.82.118.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://raw.githubusercontent.com/UbuntuForums/wireless-info/master/wireless-info [following]
--2019-05-28 23:33:07-- https://raw.githubusercontent.com/UbuntuForums/wireless-info/master/wireless-info
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.60.133, 64:ff9b::9765:3c85
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.60.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 17452 (17K) [text/plain]
Saving to: ‘wireless-info’
wireless-info 100%[=================================================================>] 17.04K 15.9KB/s in 1.1s
Last-modified header missing -- time-stamps turned off.
2019-05-28 23:33:09 (15.9 KB/s) - ‘wireless-info’ saved [17452/17452]
Results saved in "/home/wilbur/wireless-info.txt".
Results also archived in "/home/wilbur/wireless-info.tar.gz", as they exceed the 19.5 kB size limit for ".txt" attachments on the Ubuntu Forums.
wilbur@wilbur-E200HA:~$
#### wireless info START
Report from: 28 May 2019 23:33 BST +0100
Booted last: 28 May 2019 00:00 BST +0100
Script from: 22 Oct 2018 03:34 UTC +0000
release
Distributor ID: Ubuntu
Description: Ubuntu 18.04.2 LTS
Release: 18.04
Codename: bionic
kernel
Linux 4.16.0+ #1 SMP Mon Apr 2 16:37:34 CEST 2018 x86_64 x86_64 x86_64 GNU/Linux
Parameters: ro, quiet, splash, vt.handoff=1
desktop
Ubuntu
lspci
01:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter [168c:0042] (rev 31)
Subsystem: AzureWave QCA9377 802.11ac Wireless Network Adapter [1a3b:2b31]
Kernel driver in use: ath10k_pci
lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 13d3:3496 IMC Networks
Bus 001 Device 002: ID 0bda:57ed Realtek Semiconductor Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
PCMCIA card info
rfkill
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
secure boot
SecureBoot disabled
Platform is in Setup Mode
lsmod
asus_nb_wmi 28672 0
asus_wmi 28672 1 asus_nb_wmi
sparse_keymap 16384 1 asus_wmi
ath10k_pci 49152 0
ath10k_core 368640 1 ath10k_pci
ath 28672 1 ath10k_core
mac80211 778240 1 ath10k_core
cfg80211 626688 3 mac80211,ath,ath10k_core
wmi 24576 1 asus_wmi
video 40960 3 asus_wmi,int3406_thermal,i915
interfaces
[/etc/network/interfaces]
auto lo
iface lo inet loopback
ifconfig
1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback brd
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: bnep0: mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000
link/ether brd
inet 172.20.10.5/28 brd 172.20.10.15 scope global dynamic noprefixroute bnep0
valid_lft 78767sec preferred_lft 78767sec
inet6 fe80::9fdd:81cf:7b9c:d633/64 scope link noprefixroute
valid_lft forever preferred_lft forever
iwconfig
lo no wireless extensions.
bnep0 no wireless extensions.
route
default via 172.20.10.1 dev bnep0 proto dhcp metric 750
169.254.0.0/16 dev bnep0 scope link metric 1000
172.20.10.0/28 dev bnep0 proto kernel scope link src 172.20.10.5 metric 750
resolv.conf
[777 root '/etc/resolv.conf' -> '../run/resolvconf/resolv.conf']
nameserver 127.0.0.53
network managers
Installed:
NetworkManager
Running:
root 792 1 0 21:39 ? 00:00:01 /usr/sbin/NetworkManager --no-daemon
NetworkManager info
GENERAL.DEVICE:
GENERAL.TYPE: bt
GENERAL.NM-TYPE: NMDeviceBt
GENERAL.VENDOR: --
GENERAL.PRODUCT: --
GENERAL.DRIVER: bluez
GENERAL.DRIVER-VERSION: --
GENERAL.FIRMWARE-VERSION: --
GENERAL.HWADDR:
GENERAL.MTU: 1500
GENERAL.STATE: 100 (connected)
GENERAL.REASON: 0 (No reason given)
GENERAL.UDI: /org/bluez/hci0/dev_80_82_23_4F_5C_C2
GENERAL.IP-IFACE: bnep0
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: Ian’s iPhone Network
GENERAL.CON-UUID: 249c8e9b-a032-476d-a939-857f8c8e49b0
GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/1
GENERAL.METERED: no (guessed)
CAPABILITIES.CARRIER-DETECT: no
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
CAPABILITIES.SRIOV: no
IP4.ADDRESS1: 172.20.10.5/28
IP4.GATEWAY: 172.20.10.1
IP4.ROUTE1: dst = 0.0.0.0/0, nh = 172.20.10.1, mt = 750
IP4.ROUTE[2]: dst = 172.20.10.0/28, nh = 0.0.0.0, mt = 750
IP4.ROUTE[3]: dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
IP4.DNS1: 172.20.10.1
DHCP4.OPTION1: requested_domain_search = 1
DHCP4.OPTION[2]: server_name = Ians-iPhone
DHCP4.OPTION[3]: requested_broadcast_address = 1
DHCP4.OPTION[4]: requested_domain_name = 1
DHCP4.OPTION[5]: requested_rfc3442_classless_static_routes = 1
DHCP4.OPTION[6]: requested_time_offset = 1
DHCP4.OPTION[7]: requested_wpad = 1
DHCP4.OPTION[8]: requested_netbios_scope = 1
DHCP4.OPTION[9]: next_server = 172.20.10.1
DHCP4.OPTION[10]: broadcast_address = 172.20.10.15
DHCP4.OPTION[11]: dhcp_message_type = 5
DHCP4.OPTION[12]: requested_interface_mtu = 1
DHCP4.OPTION[13]: dhcp_lease_time = 85536
DHCP4.OPTION[14]: routers = 172.20.10.1
DHCP4.OPTION[15]: ip_address = 172.20.10.5
DHCP4.OPTION[16]: subnet_mask = 255.255.255.240
DHCP4.OPTION[17]: expiry = 1559161556
DHCP4.OPTION[18]: requested_subnet_mask = 1
DHCP4.OPTION[19]: requested_static_routes = 1
DHCP4.OPTION[20]: requested_ntp_servers = 1
DHCP4.OPTION[21]: domain_name_servers = 172.20.10.1
DHCP4.OPTION[22]: requested_netbios_name_servers = 1
DHCP4.OPTION[23]: requested_ms_classless_static_routes = 1
DHCP4.OPTION[24]: requested_routers = 1
DHCP4.OPTION[25]: requested_domain_name_servers = 1
DHCP4.OPTION[26]: network_number = 172.20.10.0
DHCP4.OPTION[27]: requested_host_name = 1
DHCP4.OPTION[28]: dhcp_server_identifier = 172.20.10.1
IP6.ADDRESS1: fe80::9fdd:81cf:7b9c:d633/64
IP6.GATEWAY: --
IP6.ROUTE1: dst = ff00::/8, nh = ::, mt = 256, table=255
IP6.ROUTE[2]: dst = fe80::/64, nh = ::, mt = 256
IP6.ROUTE[3]: dst = fe80::/64, nh = ::, mt = 750
BLUETOOTH.CAPABILITIES: NAP
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/15
CONNECTIONS.AVAILABLE-CONNECTIONS1: 249c8e9b-a032-476d-a939-857f8c8e49b0 | Ian’s iPhone Network
GENERAL.DEVICE:
GENERAL.TYPE: bt
GENERAL.NM-TYPE: NMDeviceBt
GENERAL.VENDOR: --
GENERAL.PRODUCT: --
GENERAL.DRIVER: bluez
GENERAL.DRIVER-VERSION: --
GENERAL.FIRMWARE-VERSION: --
GENERAL.HWADDR:
GENERAL.MTU: 0
GENERAL.STATE: 30 (disconnected)
GENERAL.REASON: 0 (No reason given)
GENERAL.UDI: /org/bluez/hci0/dev_78_C3_E9_83_F1_DD
GENERAL.IP-IFACE: --
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: --
GENERAL.CON-UUID: --
GENERAL.CON-PATH: --
GENERAL.METERED: unknown
CAPABILITIES.CARRIER-DETECT: no
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
CAPABILITIES.SRIOV: no
BLUETOOTH.CAPABILITIES: NAP
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/14
CONNECTIONS.AVAILABLE-CONNECTIONS1: f3267832-b90a-4cbf-bd86-86d4c9a1929b | Galaxy J5 Network
NetworkManager.state
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
NetworkManager config
[[/etc/NetworkManager/conf.d/default-wifi-powersave-on.conf]]
[connection]
wifi.powersave = 3
[[/etc/NetworkManager/NetworkManager.conf]]
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=false
[device]
wifi.scan-rand-mac-address=no
[[/usr/lib/NetworkManager/conf.d/10-dns-resolved.conf]]
[main]
dns=systemd-resolved
[[/usr/lib/NetworkManager/conf.d/10-globally-managed-devices.conf]]
[keyfile]
unmanaged-devices=*,except:type:wifi,except:type:wwan
[[/usr/lib/NetworkManager/conf.d/20-connectivity-ubuntu.conf]]
[connectivity]
uri=http://connectivity-check.ubuntu.com/
[[/usr/lib/NetworkManager/conf.d/no-mac-addr-change.conf]]
[device-mac-addr-change-wifi]
match-device=driver:rtl8723bs,driver:rtl8189es,driver:r8188eu,driver:8188eu,driver:eagle_sdio,driver:wl
wifi.scan-rand-mac-address=no
wifi.cloned-mac-address=preserve
ethernet.cloned-mac-address=preserve
NetworkManager profiles
[[/etc/NetworkManager/system-connections/HolidayInnGuestWi-Fi]] (600 root)
[connection] id=HolidayInnGuestWi-Fi | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=HolidayInnGuestWi-Fi
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Ian’s iPhone]] (600 root)
[connection] id=Ian’s iPhone | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=73;97;110;226;128;153;115;32;105;80;104;111;110;101;
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/ZyXELEA57DC]] (600 root)
[connection] id=ZyXELEA57DC | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=ZyXELEA57DC
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/SWR WiFi]] (600 root)
[connection] id=SWR WiFi | type=wifi | autoconnect=false | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=SWR WiFi
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Private Guest]] (600 root)
[connection] id=Private Guest | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=Private Guest
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/ZyXELEA57DC_5G]] (600 root)
[connection] id=ZyXELEA57DC_5G | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=ZyXELEA57DC_5G
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/iPhone]] (600 root)
[connection] id=iPhone | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=iPhone
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/77X_Guest]] (600 root)
[connection] id=77X_Guest | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=77X_Guest
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/DIO-WIFI]] (600 root)
[connection] id=DIO-WIFI | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=DIO-WIFI
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/RSMS_Guest]] (600 root)
[connection] id=RSMS_Guest | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=RSMS_Guest
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/PlusnetWireless2B7338]] (600 root)
[connection] id=PlusnetWireless2B7338 | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=PlusnetWireless2B7338
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Sagemcom-QR6Q78]] (600 root)
[connection] id=Sagemcom-QR6Q78 | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=Sagemcom-QR6Q78
[ipv4] method=auto
[ipv6] method=auto
Netplan config
iw reg get
Region: Europe/London (based on set time zone)
global
country 00: DFS-UNSET
(2402 - 2472 @ 40), (N/A, 20), (N/A)
(2457 - 2482 @ 20), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, PASSIVE-SCAN
(5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW, PASSIVE-SCAN
(5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, PASSIVE-SCAN
(5735 - 5835 @ 80), (N/A, 20), (N/A), PASSIVE-SCAN
(57240 - 63720 @ 2160), (N/A, 0), (N/A)
iwlist channels
lo no frequency information.
bnep0 no frequency information.
iwlist scan
lo Interface doesn't support scanning.
bnep0 Interface doesn't support scanning.
module infos
[ath10k_pci]
filename: /lib/modules/4.16.0+/kernel/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
firmware: ath10k/QCA9377/hw1.0/board.bin
firmware: ath10k/QCA9377/hw1.0/firmware-5.bin
firmware: ath10k/QCA6174/hw3.0/board-2.bin
firmware: ath10k/QCA6174/hw3.0/board.bin
firmware: ath10k/QCA6174/hw3.0/firmware-6.bin
firmware: ath10k/QCA6174/hw3.0/firmware-5.bin
firmware: ath10k/QCA6174/hw3.0/firmware-4.bin
firmware: ath10k/QCA6174/hw2.1/board-2.bin
firmware: ath10k/QCA6174/hw2.1/board.bin
firmware: ath10k/QCA6174/hw2.1/firmware-5.bin
firmware: ath10k/QCA6174/hw2.1/firmware-4.bin
firmware: ath10k/QCA9887/hw1.0/board-2.bin
firmware: ath10k/QCA9887/hw1.0/board.bin
firmware: ath10k/QCA9887/hw1.0/firmware-5.bin
firmware: ath10k/QCA988X/hw2.0/board-2.bin
firmware: ath10k/QCA988X/hw2.0/board.bin
firmware: ath10k/QCA988X/hw2.0/firmware-5.bin
firmware: ath10k/QCA988X/hw2.0/firmware-4.bin
firmware: ath10k/QCA988X/hw2.0/firmware-3.bin
firmware: ath10k/QCA988X/hw2.0/firmware-2.bin
license: Dual BSD/GPL
description: Driver support for Qualcomm Atheros 802.11ac WLAN PCIe/AHB devices
author: Qualcomm Atheros
srcversion: 228292A42E3072B9E09755C
depends: ath10k_core
retpoline: Y
intree: Y
name: ath10k_pci
vermagic: 4.16.0+ SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: irq_mode:0: auto, 1: legacy, 2: msi (default: 0) (uint)
parm: reset_mode:0: auto, 1: warm only (default: 0) (uint)
[ath10k_core]
filename: /lib/modules/4.16.0+/kernel/drivers/net/wireless/ath/ath10k/ath10k_core.ko
license: Dual BSD/GPL
description: Core module for Qualcomm Atheros 802.11ac wireless LAN cards.
author: Qualcomm Atheros
srcversion: D96CC39234307CA4276A7C8
depends: mac80211,cfg80211,ath
retpoline: Y
intree: Y
name: ath10k_core
vermagic: 4.16.0+ SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: debug_mask:Debugging mask (uint)
parm: uart_print:Uart target debugging (bool)
parm: skip_otp:Skip otp failure for calibration in testmode (bool)
parm: cryptmode:Crypto mode: 0-hardware, 1-software (uint)
parm: rawmode:Use raw 802.11 frame datapath (bool)
parm: coredump_mask:Bitfield of what to include in firmware crash file (ulong)
[ath]
filename: /lib/modules/4.16.0+/kernel/drivers/net/wireless/ath/ath.ko
license: Dual BSD/GPL
description: Shared library for Atheros wireless LAN cards.
author: Atheros Communications
srcversion: 555BBBB9D4FCA58A05E7C0D
depends: cfg80211
retpoline: Y
intree: Y
name: ath
vermagic: 4.16.0+ SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
[mac80211]
filename: /lib/modules/4.16.0+/kernel/net/mac80211/mac80211.ko
license: GPL
description: IEEE 802.11 subsystem
srcversion: 8FA1436C1506A22E399CDBE
depends: cfg80211
retpoline: Y
intree: Y
name: mac80211
vermagic: 4.16.0+ SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm: max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm: max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm: beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm: probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
[cfg80211]
filename: /lib/modules/4.16.0+/kernel/net/wireless/cfg80211.ko
description: wireless configuration support
license: GPL
author: Johannes Berg
srcversion: 2443BFD11787A6D4458157B
depends:
retpoline: Y
intree: Y
name: cfg80211
vermagic: 4.16.0+ SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
module parameters
[ath10k_pci]
irq_mode: 0
reset_mode: 0
[ath10k_core]
coredump_mask: 3
cryptmode: 0
debug_mask: 0
rawmode: N
skip_otp: N
uart_print: N
[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
minstrel_vht_only: Y
probe_wait_ms: 500
[cfg80211]
bss_entries_limit: 1000
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00
/etc/modules
modprobe options
[/etc/modprobe.d/amd64-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci
[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac
[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off
[/etc/modprobe.d/intel-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod)
&& /sbin/modprobe -r mac80211
[/etc/modprobe.d/rtl8723de.conf]
options rtl8723de ant_sel=X
rc.local
grep: /etc/rc.local: No such file or directory
pm-utils
udev rules
dmesg
#### wireless info END
wilbur@wilbur-E200HA:~$ sudo lspci -v
[sudo] password for wilbur:
...
01:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31)
Subsystem: AzureWave QCA9377 802.11ac Wireless Network Adapter
Flags: bus master, fast devsel, latency 0, IRQ 127
Memory at 91200000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit-
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [148] Virtual Channel
Capabilities: [168] Device Serial Number 00-00-00-00-00-00-00-00
Capabilities: [178] Latency Tolerance Reporting
Capabilities: [180] L1 PM Substates
Kernel driver in use: ath10k_pci
Kernel modules: ath10k_pci
wilbur@wilbur-E200HA:~$
wireless upgrade
Yesterday my laptop (ASUS E200HA) was upgraded to 18.04.2, but now the WiFi doesn't work. I've tried following just about every instruction for 10 hours now and still no joy. Bluetooth works, which is how I'm connected just now.
wilbur@wilbur-E200HA:~$ rfkill list all
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
wilbur@wilbur-E200HA:~$
wilbur@wilbur-E200HA:~$ sudo lspci -knn | grep Net -A3
01:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter [168c:0042] (rev 31)
Subsystem: AzureWave QCA9377 802.11ac Wireless Network Adapter [1a3b:2b31]
Kernel driver in use: ath10k_pci
Kernel modules: ath10k_pci
wilbur@wilbur-E200HA:~$
wilbur@wilbur-E200HA:~$ sudo lshw -C network
*-network
description: Network controller
product: QCA9377 802.11ac Wireless Network Adapter
vendor: Qualcomm Atheros
physical id: 0
bus info: pci@0000:01:00.0
version: 31
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=ath10k_pci latency=0
resources: irq:126 memory:91200000-913fffff
*-network
description: Ethernet interface
physical id: 1
logical name: bnep0
serial: f0:03:8c:a2:28:58
capabilities: ethernet physical
configuration: broadcast=yes ip=172.20.10.5 multicast=yes
wilbur@wilbur-E200HA:~$
ilbur@wilbur-E200HA:~$ wget -N -t 5 -T 10 https://github.com/UbuntuForums/wireless-info/raw/master/wireless-info &&
chmod +x wireless-info &&
./wireless-info
--2019-05-28 23:33:05-- https://github.com/UbuntuForums/wireless-info/raw/master/wireless-info
Resolving github.com (github.com)... 140.82.118.4, 64:ff9b::8c52:7603
Connecting to github.com (github.com)|140.82.118.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://raw.githubusercontent.com/UbuntuForums/wireless-info/master/wireless-info [following]
--2019-05-28 23:33:07-- https://raw.githubusercontent.com/UbuntuForums/wireless-info/master/wireless-info
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.60.133, 64:ff9b::9765:3c85
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.60.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 17452 (17K) [text/plain]
Saving to: ‘wireless-info’
wireless-info 100%[=================================================================>] 17.04K 15.9KB/s in 1.1s
Last-modified header missing -- time-stamps turned off.
2019-05-28 23:33:09 (15.9 KB/s) - ‘wireless-info’ saved [17452/17452]
Results saved in "/home/wilbur/wireless-info.txt".
Results also archived in "/home/wilbur/wireless-info.tar.gz", as they exceed the 19.5 kB size limit for ".txt" attachments on the Ubuntu Forums.
wilbur@wilbur-E200HA:~$
#### wireless info START
Report from: 28 May 2019 23:33 BST +0100
Booted last: 28 May 2019 00:00 BST +0100
Script from: 22 Oct 2018 03:34 UTC +0000
release
Distributor ID: Ubuntu
Description: Ubuntu 18.04.2 LTS
Release: 18.04
Codename: bionic
kernel
Linux 4.16.0+ #1 SMP Mon Apr 2 16:37:34 CEST 2018 x86_64 x86_64 x86_64 GNU/Linux
Parameters: ro, quiet, splash, vt.handoff=1
desktop
Ubuntu
lspci
01:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter [168c:0042] (rev 31)
Subsystem: AzureWave QCA9377 802.11ac Wireless Network Adapter [1a3b:2b31]
Kernel driver in use: ath10k_pci
lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 13d3:3496 IMC Networks
Bus 001 Device 002: ID 0bda:57ed Realtek Semiconductor Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
PCMCIA card info
rfkill
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
secure boot
SecureBoot disabled
Platform is in Setup Mode
lsmod
asus_nb_wmi 28672 0
asus_wmi 28672 1 asus_nb_wmi
sparse_keymap 16384 1 asus_wmi
ath10k_pci 49152 0
ath10k_core 368640 1 ath10k_pci
ath 28672 1 ath10k_core
mac80211 778240 1 ath10k_core
cfg80211 626688 3 mac80211,ath,ath10k_core
wmi 24576 1 asus_wmi
video 40960 3 asus_wmi,int3406_thermal,i915
interfaces
[/etc/network/interfaces]
auto lo
iface lo inet loopback
ifconfig
1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback brd
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: bnep0: mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000
link/ether brd
inet 172.20.10.5/28 brd 172.20.10.15 scope global dynamic noprefixroute bnep0
valid_lft 78767sec preferred_lft 78767sec
inet6 fe80::9fdd:81cf:7b9c:d633/64 scope link noprefixroute
valid_lft forever preferred_lft forever
iwconfig
lo no wireless extensions.
bnep0 no wireless extensions.
route
default via 172.20.10.1 dev bnep0 proto dhcp metric 750
169.254.0.0/16 dev bnep0 scope link metric 1000
172.20.10.0/28 dev bnep0 proto kernel scope link src 172.20.10.5 metric 750
resolv.conf
[777 root '/etc/resolv.conf' -> '../run/resolvconf/resolv.conf']
nameserver 127.0.0.53
network managers
Installed:
NetworkManager
Running:
root 792 1 0 21:39 ? 00:00:01 /usr/sbin/NetworkManager --no-daemon
NetworkManager info
GENERAL.DEVICE:
GENERAL.TYPE: bt
GENERAL.NM-TYPE: NMDeviceBt
GENERAL.VENDOR: --
GENERAL.PRODUCT: --
GENERAL.DRIVER: bluez
GENERAL.DRIVER-VERSION: --
GENERAL.FIRMWARE-VERSION: --
GENERAL.HWADDR:
GENERAL.MTU: 1500
GENERAL.STATE: 100 (connected)
GENERAL.REASON: 0 (No reason given)
GENERAL.UDI: /org/bluez/hci0/dev_80_82_23_4F_5C_C2
GENERAL.IP-IFACE: bnep0
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: Ian’s iPhone Network
GENERAL.CON-UUID: 249c8e9b-a032-476d-a939-857f8c8e49b0
GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/1
GENERAL.METERED: no (guessed)
CAPABILITIES.CARRIER-DETECT: no
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
CAPABILITIES.SRIOV: no
IP4.ADDRESS1: 172.20.10.5/28
IP4.GATEWAY: 172.20.10.1
IP4.ROUTE1: dst = 0.0.0.0/0, nh = 172.20.10.1, mt = 750
IP4.ROUTE[2]: dst = 172.20.10.0/28, nh = 0.0.0.0, mt = 750
IP4.ROUTE[3]: dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
IP4.DNS1: 172.20.10.1
DHCP4.OPTION1: requested_domain_search = 1
DHCP4.OPTION[2]: server_name = Ians-iPhone
DHCP4.OPTION[3]: requested_broadcast_address = 1
DHCP4.OPTION[4]: requested_domain_name = 1
DHCP4.OPTION[5]: requested_rfc3442_classless_static_routes = 1
DHCP4.OPTION[6]: requested_time_offset = 1
DHCP4.OPTION[7]: requested_wpad = 1
DHCP4.OPTION[8]: requested_netbios_scope = 1
DHCP4.OPTION[9]: next_server = 172.20.10.1
DHCP4.OPTION[10]: broadcast_address = 172.20.10.15
DHCP4.OPTION[11]: dhcp_message_type = 5
DHCP4.OPTION[12]: requested_interface_mtu = 1
DHCP4.OPTION[13]: dhcp_lease_time = 85536
DHCP4.OPTION[14]: routers = 172.20.10.1
DHCP4.OPTION[15]: ip_address = 172.20.10.5
DHCP4.OPTION[16]: subnet_mask = 255.255.255.240
DHCP4.OPTION[17]: expiry = 1559161556
DHCP4.OPTION[18]: requested_subnet_mask = 1
DHCP4.OPTION[19]: requested_static_routes = 1
DHCP4.OPTION[20]: requested_ntp_servers = 1
DHCP4.OPTION[21]: domain_name_servers = 172.20.10.1
DHCP4.OPTION[22]: requested_netbios_name_servers = 1
DHCP4.OPTION[23]: requested_ms_classless_static_routes = 1
DHCP4.OPTION[24]: requested_routers = 1
DHCP4.OPTION[25]: requested_domain_name_servers = 1
DHCP4.OPTION[26]: network_number = 172.20.10.0
DHCP4.OPTION[27]: requested_host_name = 1
DHCP4.OPTION[28]: dhcp_server_identifier = 172.20.10.1
IP6.ADDRESS1: fe80::9fdd:81cf:7b9c:d633/64
IP6.GATEWAY: --
IP6.ROUTE1: dst = ff00::/8, nh = ::, mt = 256, table=255
IP6.ROUTE[2]: dst = fe80::/64, nh = ::, mt = 256
IP6.ROUTE[3]: dst = fe80::/64, nh = ::, mt = 750
BLUETOOTH.CAPABILITIES: NAP
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/15
CONNECTIONS.AVAILABLE-CONNECTIONS1: 249c8e9b-a032-476d-a939-857f8c8e49b0 | Ian’s iPhone Network
GENERAL.DEVICE:
GENERAL.TYPE: bt
GENERAL.NM-TYPE: NMDeviceBt
GENERAL.VENDOR: --
GENERAL.PRODUCT: --
GENERAL.DRIVER: bluez
GENERAL.DRIVER-VERSION: --
GENERAL.FIRMWARE-VERSION: --
GENERAL.HWADDR:
GENERAL.MTU: 0
GENERAL.STATE: 30 (disconnected)
GENERAL.REASON: 0 (No reason given)
GENERAL.UDI: /org/bluez/hci0/dev_78_C3_E9_83_F1_DD
GENERAL.IP-IFACE: --
GENERAL.IS-SOFTWARE: no
GENERAL.NM-MANAGED: yes
GENERAL.AUTOCONNECT: yes
GENERAL.FIRMWARE-MISSING: no
GENERAL.NM-PLUGIN-MISSING: no
GENERAL.PHYS-PORT-ID: --
GENERAL.CONNECTION: --
GENERAL.CON-UUID: --
GENERAL.CON-PATH: --
GENERAL.METERED: unknown
CAPABILITIES.CARRIER-DETECT: no
CAPABILITIES.SPEED: unknown
CAPABILITIES.IS-SOFTWARE: no
CAPABILITIES.SRIOV: no
BLUETOOTH.CAPABILITIES: NAP
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/14
CONNECTIONS.AVAILABLE-CONNECTIONS1: f3267832-b90a-4cbf-bd86-86d4c9a1929b | Galaxy J5 Network
NetworkManager.state
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
NetworkManager config
[[/etc/NetworkManager/conf.d/default-wifi-powersave-on.conf]]
[connection]
wifi.powersave = 3
[[/etc/NetworkManager/NetworkManager.conf]]
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=false
[device]
wifi.scan-rand-mac-address=no
[[/usr/lib/NetworkManager/conf.d/10-dns-resolved.conf]]
[main]
dns=systemd-resolved
[[/usr/lib/NetworkManager/conf.d/10-globally-managed-devices.conf]]
[keyfile]
unmanaged-devices=*,except:type:wifi,except:type:wwan
[[/usr/lib/NetworkManager/conf.d/20-connectivity-ubuntu.conf]]
[connectivity]
uri=http://connectivity-check.ubuntu.com/
[[/usr/lib/NetworkManager/conf.d/no-mac-addr-change.conf]]
[device-mac-addr-change-wifi]
match-device=driver:rtl8723bs,driver:rtl8189es,driver:r8188eu,driver:8188eu,driver:eagle_sdio,driver:wl
wifi.scan-rand-mac-address=no
wifi.cloned-mac-address=preserve
ethernet.cloned-mac-address=preserve
NetworkManager profiles
[[/etc/NetworkManager/system-connections/HolidayInnGuestWi-Fi]] (600 root)
[connection] id=HolidayInnGuestWi-Fi | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=HolidayInnGuestWi-Fi
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Ian’s iPhone]] (600 root)
[connection] id=Ian’s iPhone | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=73;97;110;226;128;153;115;32;105;80;104;111;110;101;
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/ZyXELEA57DC]] (600 root)
[connection] id=ZyXELEA57DC | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=ZyXELEA57DC
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/SWR WiFi]] (600 root)
[connection] id=SWR WiFi | type=wifi | autoconnect=false | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=SWR WiFi
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Private Guest]] (600 root)
[connection] id=Private Guest | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=Private Guest
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/ZyXELEA57DC_5G]] (600 root)
[connection] id=ZyXELEA57DC_5G | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=ZyXELEA57DC_5G
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/iPhone]] (600 root)
[connection] id=iPhone | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=iPhone
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/77X_Guest]] (600 root)
[connection] id=77X_Guest | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=77X_Guest
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/DIO-WIFI]] (600 root)
[connection] id=DIO-WIFI | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=DIO-WIFI
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/RSMS_Guest]] (600 root)
[connection] id=RSMS_Guest | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=RSMS_Guest
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/PlusnetWireless2B7338]] (600 root)
[connection] id=PlusnetWireless2B7338 | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=PlusnetWireless2B7338
[ipv4] method=auto
[ipv6] method=auto
[[/etc/NetworkManager/system-connections/Sagemcom-QR6Q78]] (600 root)
[connection] id=Sagemcom-QR6Q78 | type=wifi | permissions=
[wifi] mac-address= | mac-address-blacklist= | ssid=Sagemcom-QR6Q78
[ipv4] method=auto
[ipv6] method=auto
Netplan config
iw reg get
Region: Europe/London (based on set time zone)
global
country 00: DFS-UNSET
(2402 - 2472 @ 40), (N/A, 20), (N/A)
(2457 - 2482 @ 20), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, PASSIVE-SCAN
(5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW, PASSIVE-SCAN
(5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, PASSIVE-SCAN
(5735 - 5835 @ 80), (N/A, 20), (N/A), PASSIVE-SCAN
(57240 - 63720 @ 2160), (N/A, 0), (N/A)
iwlist channels
lo no frequency information.
bnep0 no frequency information.
iwlist scan
lo Interface doesn't support scanning.
bnep0 Interface doesn't support scanning.
module infos
[ath10k_pci]
filename: /lib/modules/4.16.0+/kernel/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
firmware: ath10k/QCA9377/hw1.0/board.bin
firmware: ath10k/QCA9377/hw1.0/firmware-5.bin
firmware: ath10k/QCA6174/hw3.0/board-2.bin
firmware: ath10k/QCA6174/hw3.0/board.bin
firmware: ath10k/QCA6174/hw3.0/firmware-6.bin
firmware: ath10k/QCA6174/hw3.0/firmware-5.bin
firmware: ath10k/QCA6174/hw3.0/firmware-4.bin
firmware: ath10k/QCA6174/hw2.1/board-2.bin
firmware: ath10k/QCA6174/hw2.1/board.bin
firmware: ath10k/QCA6174/hw2.1/firmware-5.bin
firmware: ath10k/QCA6174/hw2.1/firmware-4.bin
firmware: ath10k/QCA9887/hw1.0/board-2.bin
firmware: ath10k/QCA9887/hw1.0/board.bin
firmware: ath10k/QCA9887/hw1.0/firmware-5.bin
firmware: ath10k/QCA988X/hw2.0/board-2.bin
firmware: ath10k/QCA988X/hw2.0/board.bin
firmware: ath10k/QCA988X/hw2.0/firmware-5.bin
firmware: ath10k/QCA988X/hw2.0/firmware-4.bin
firmware: ath10k/QCA988X/hw2.0/firmware-3.bin
firmware: ath10k/QCA988X/hw2.0/firmware-2.bin
license: Dual BSD/GPL
description: Driver support for Qualcomm Atheros 802.11ac WLAN PCIe/AHB devices
author: Qualcomm Atheros
srcversion: 228292A42E3072B9E09755C
depends: ath10k_core
retpoline: Y
intree: Y
name: ath10k_pci
vermagic: 4.16.0+ SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: irq_mode:0: auto, 1: legacy, 2: msi (default: 0) (uint)
parm: reset_mode:0: auto, 1: warm only (default: 0) (uint)
[ath10k_core]
filename: /lib/modules/4.16.0+/kernel/drivers/net/wireless/ath/ath10k/ath10k_core.ko
license: Dual BSD/GPL
description: Core module for Qualcomm Atheros 802.11ac wireless LAN cards.
author: Qualcomm Atheros
srcversion: D96CC39234307CA4276A7C8
depends: mac80211,cfg80211,ath
retpoline: Y
intree: Y
name: ath10k_core
vermagic: 4.16.0+ SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: debug_mask:Debugging mask (uint)
parm: uart_print:Uart target debugging (bool)
parm: skip_otp:Skip otp failure for calibration in testmode (bool)
parm: cryptmode:Crypto mode: 0-hardware, 1-software (uint)
parm: rawmode:Use raw 802.11 frame datapath (bool)
parm: coredump_mask:Bitfield of what to include in firmware crash file (ulong)
[ath]
filename: /lib/modules/4.16.0+/kernel/drivers/net/wireless/ath/ath.ko
license: Dual BSD/GPL
description: Shared library for Atheros wireless LAN cards.
author: Atheros Communications
srcversion: 555BBBB9D4FCA58A05E7C0D
depends: cfg80211
retpoline: Y
intree: Y
name: ath
vermagic: 4.16.0+ SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
[mac80211]
filename: /lib/modules/4.16.0+/kernel/net/mac80211/mac80211.ko
license: GPL
description: IEEE 802.11 subsystem
srcversion: 8FA1436C1506A22E399CDBE
depends: cfg80211
retpoline: Y
intree: Y
name: mac80211
vermagic: 4.16.0+ SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm: max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm: max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm: beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm: probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
[cfg80211]
filename: /lib/modules/4.16.0+/kernel/net/wireless/cfg80211.ko
description: wireless configuration support
license: GPL
author: Johannes Berg
srcversion: 2443BFD11787A6D4458157B
depends:
retpoline: Y
intree: Y
name: cfg80211
vermagic: 4.16.0+ SMP mod_unload
signat: PKCS#7
signer:
sig_key:
sig_hashalgo: md4
parm: bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
module parameters
[ath10k_pci]
irq_mode: 0
reset_mode: 0
[ath10k_core]
coredump_mask: 3
cryptmode: 0
debug_mask: 0
rawmode: N
skip_otp: N
uart_print: N
[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
minstrel_vht_only: Y
probe_wait_ms: 500
[cfg80211]
bss_entries_limit: 1000
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00
/etc/modules
modprobe options
[/etc/modprobe.d/amd64-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci
[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac
[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off
[/etc/modprobe.d/intel-microcode-blacklist.conf]
blacklist microcode
[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod)
&& /sbin/modprobe -r mac80211
[/etc/modprobe.d/rtl8723de.conf]
options rtl8723de ant_sel=X
rc.local
grep: /etc/rc.local: No such file or directory
pm-utils
udev rules
dmesg
#### wireless info END
wilbur@wilbur-E200HA:~$ sudo lspci -v
[sudo] password for wilbur:
...
01:00.0 Network controller: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31)
Subsystem: AzureWave QCA9377 802.11ac Wireless Network Adapter
Flags: bus master, fast devsel, latency 0, IRQ 127
Memory at 91200000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit-
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [148] Virtual Channel
Capabilities: [168] Device Serial Number 00-00-00-00-00-00-00-00
Capabilities: [178] Latency Tolerance Reporting
Capabilities: [180] L1 PM Substates
Kernel driver in use: ath10k_pci
Kernel modules: ath10k_pci
wilbur@wilbur-E200HA:~$
wireless upgrade
wireless upgrade
edited May 30 at 6:51
Wilbur_E200H
asked May 28 at 21:14
Wilbur_E200HWilbur_E200H
11 bronze badge
11 bronze badge
See askubuntu.com/questions/425155/… and edit your post to include wireless script results
– Jeremy31
May 28 at 22:27
Thanks, have done that (see above).
– Wilbur_E200H
May 28 at 22:35
Another whole day trying to resolve this - is there another update coming out to correct the last update? I'm so fed up with this I'm on the verge of going back to Mint :(
– Wilbur_E200H
May 29 at 22:42
trysudo sed -i 's/3/2/' /etc/NetworkManager/conf.d/*
and reboot, wifi power management might be causing the driver to crash
– Jeremy31
May 29 at 22:59
Thanks @Jeremy31 tried that but sadly no joy. Still no wifi adapter found.
– Wilbur_E200H
May 30 at 6:38
|
show 2 more comments
See askubuntu.com/questions/425155/… and edit your post to include wireless script results
– Jeremy31
May 28 at 22:27
Thanks, have done that (see above).
– Wilbur_E200H
May 28 at 22:35
Another whole day trying to resolve this - is there another update coming out to correct the last update? I'm so fed up with this I'm on the verge of going back to Mint :(
– Wilbur_E200H
May 29 at 22:42
trysudo sed -i 's/3/2/' /etc/NetworkManager/conf.d/*
and reboot, wifi power management might be causing the driver to crash
– Jeremy31
May 29 at 22:59
Thanks @Jeremy31 tried that but sadly no joy. Still no wifi adapter found.
– Wilbur_E200H
May 30 at 6:38
See askubuntu.com/questions/425155/… and edit your post to include wireless script results
– Jeremy31
May 28 at 22:27
See askubuntu.com/questions/425155/… and edit your post to include wireless script results
– Jeremy31
May 28 at 22:27
Thanks, have done that (see above).
– Wilbur_E200H
May 28 at 22:35
Thanks, have done that (see above).
– Wilbur_E200H
May 28 at 22:35
Another whole day trying to resolve this - is there another update coming out to correct the last update? I'm so fed up with this I'm on the verge of going back to Mint :(
– Wilbur_E200H
May 29 at 22:42
Another whole day trying to resolve this - is there another update coming out to correct the last update? I'm so fed up with this I'm on the verge of going back to Mint :(
– Wilbur_E200H
May 29 at 22:42
try
sudo sed -i 's/3/2/' /etc/NetworkManager/conf.d/*
and reboot, wifi power management might be causing the driver to crash– Jeremy31
May 29 at 22:59
try
sudo sed -i 's/3/2/' /etc/NetworkManager/conf.d/*
and reboot, wifi power management might be causing the driver to crash– Jeremy31
May 29 at 22:59
Thanks @Jeremy31 tried that but sadly no joy. Still no wifi adapter found.
– Wilbur_E200H
May 30 at 6:38
Thanks @Jeremy31 tried that but sadly no joy. Still no wifi adapter found.
– Wilbur_E200H
May 30 at 6:38
|
show 2 more comments
0
active
oldest
votes
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "89"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/4.0/"u003ecc by-sa 4.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1146954%2fwifi-fails-with-18-04-2-upgrade%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
0
active
oldest
votes
0
active
oldest
votes
active
oldest
votes
active
oldest
votes
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f1146954%2fwifi-fails-with-18-04-2-upgrade%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
See askubuntu.com/questions/425155/… and edit your post to include wireless script results
– Jeremy31
May 28 at 22:27
Thanks, have done that (see above).
– Wilbur_E200H
May 28 at 22:35
Another whole day trying to resolve this - is there another update coming out to correct the last update? I'm so fed up with this I'm on the verge of going back to Mint :(
– Wilbur_E200H
May 29 at 22:42
try
sudo sed -i 's/3/2/' /etc/NetworkManager/conf.d/*
and reboot, wifi power management might be causing the driver to crash– Jeremy31
May 29 at 22:59
Thanks @Jeremy31 tried that but sadly no joy. Still no wifi adapter found.
– Wilbur_E200H
May 30 at 6:38