What powers an aircraft prior to the APU being switched on?What is the cable connected to a plane for?In what conditions is the APU used in midair?What is “Hotel Mode” on a turboprop engine?Why do aircraft use 400 Hz AC instead of the 50 or 60 Hz of wall outlets?What is this tube connected to a 757 for?Why is engine No.2 started first, instead of No.1?External BatteriesWhy is the APU located in the tail for almost all commercial aircraft?What could cause the APU on a Boeing 777 to fail and also trip the GPU?In what conditions is the APU used in midair?What type of engine/motor is used in aircraft APU?What is the process to disconnect ground electric power before pushback?Can the APU provide emergency thrust?Why would smoke enter the cabin if the batteries are switched off before the APU flap closes?What is the difference between an APU and an ATS?What is an “all-electric APU”?What is the fuel source for the APU on a B737?
Identifying Wires behind Light Switch
Fill your bucket with 2020
Can I use Thaumaturgy to hide the effect of Detect Magic?
Texas gun laws - can an overseas visitor buy ammunition?
How can communicating in human language with an unconscious alien species be treated as an attack?
Should I provide my username and password for my brokerage account to my mortgage lender to verify my assets?
What does “critical but stable” mean?
Limit number of matches of find command
Creating 123456 in the fewest number of steps
How can there exist a profession consisting of investing others' money?
Should we stop differentiating between ln and log?
Reuse a part of a tikz picture with savebox
What is the moral difference between abortion and infanticide?
In Excel, is there a shortcut to hide a wide range of columns without mouse-dragging?
Would the moon eventually fall into Earth if we reduce its tangential velocity slightly?
Is there a way to use logic operators in Blender Shader nodes?
Understanding of big-O massively improved when I began thinking of orders as sets. How to apply the same approach to big-Theta?
To whom does "Madam Speaker" refer during the Trump impeachment debate?
Fill the Golfeek gutter
Was Greta Thunberg forced to ride on the floor of an overcrowded train?
How to understand "No she bludgering well won't!"
How and why is my site being abused?
What is the relative return point (i.e. the "space it left") of a creature banished by the Banishment spell?
What game has this black main menu?
What powers an aircraft prior to the APU being switched on?
What is the cable connected to a plane for?In what conditions is the APU used in midair?What is “Hotel Mode” on a turboprop engine?Why do aircraft use 400 Hz AC instead of the 50 or 60 Hz of wall outlets?What is this tube connected to a 757 for?Why is engine No.2 started first, instead of No.1?External BatteriesWhy is the APU located in the tail for almost all commercial aircraft?What could cause the APU on a Boeing 777 to fail and also trip the GPU?In what conditions is the APU used in midair?What type of engine/motor is used in aircraft APU?What is the process to disconnect ground electric power before pushback?Can the APU provide emergency thrust?Why would smoke enter the cabin if the batteries are switched off before the APU flap closes?What is the difference between an APU and an ATS?What is an “all-electric APU”?What is the fuel source for the APU on a B737?
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty
margin-bottom:0;
$begingroup$
I know that APUs are power plants for non-propulsion related purposes and that they are turned on before takeoff.
What powers an airplane prior to the APU being turned on?
electrical-system apu
edited Oct 3 at 21:51
Rodrigo de Azevedo
9601 gold badge6 silver badges19 bronze badges
asked Oct 2 at 7:02
AstroSharpAstroSharp
2432 silver badges5 bronze badges
$endgroup$
add a comment
|
$begingroup$
I know that APUs are power plants for non-propulsion related purposes and that they are turned on before takeoff.
What powers an airplane prior to the APU being turned on?
electrical-system apu
edited Oct 3 at 21:51
Rodrigo de Azevedo
9601 gold badge6 silver badges19 bronze badges
asked Oct 2 at 7:02
AstroSharpAstroSharp
2432 silver badges5 bronze badges
$endgroup$
6
$begingroup$
Don't rush to accept, usually waiting 24 hours is recommended so all timezones can see and answer the question.
$endgroup$
– AEhere supports Monica
Oct 2 at 7:42
add a comment
|
$begingroup$
I know that APUs are power plants for non-propulsion related purposes and that they are turned on before takeoff.
What powers an airplane prior to the APU being turned on?
electrical-system apu
edited Oct 3 at 21:51
Rodrigo de Azevedo
9601 gold badge6 silver badges19 bronze badges
asked Oct 2 at 7:02
AstroSharpAstroSharp
2432 silver badges5 bronze badges
$endgroup$
I know that APUs are power plants for non-propulsion related purposes and that they are turned on before takeoff.
What powers an airplane prior to the APU being turned on?
electrical-system apu
electrical-system apu
edited Oct 3 at 21:51
Rodrigo de Azevedo
9601 gold badge6 silver badges19 bronze badges
asked Oct 2 at 7:02
AstroSharpAstroSharp
2432 silver badges5 bronze badges
edited Oct 3 at 21:51
Rodrigo de Azevedo
9601 gold badge6 silver badges19 bronze badges
asked Oct 2 at 7:02
AstroSharpAstroSharp
2432 silver badges5 bronze badges
edited Oct 3 at 21:51
Rodrigo de Azevedo
9601 gold badge6 silver badges19 bronze badges
edited Oct 3 at 21:51
Rodrigo de Azevedo
9601 gold badge6 silver badges19 bronze badges
edited Oct 3 at 21:51
Rodrigo de Azevedo
9601 gold badge6 silver badges19 bronze badges
9601 gold badge6 silver badges19 bronze badges
asked Oct 2 at 7:02
AstroSharpAstroSharp
2432 silver badges5 bronze badges
asked Oct 2 at 7:02
AstroSharpAstroSharp
2432 silver badges5 bronze badges
asked Oct 2 at 7:02
AstroSharpAstroSharp
2432 silver badges5 bronze badges
2432 silver badges5 bronze badges
6
$begingroup$
Don't rush to accept, usually waiting 24 hours is recommended so all timezones can see and answer the question.
$endgroup$
– AEhere supports Monica
Oct 2 at 7:42
add a comment
|
6
$begingroup$
Don't rush to accept, usually waiting 24 hours is recommended so all timezones can see and answer the question.
$endgroup$
– AEhere supports Monica
Oct 2 at 7:42
6
6
$begingroup$
Don't rush to accept, usually waiting 24 hours is recommended so all timezones can see and answer the question.
$endgroup$
– AEhere supports Monica
Oct 2 at 7:42
$begingroup$
Don't rush to accept, usually waiting 24 hours is recommended so all timezones can see and answer the question.
$endgroup$
– AEhere supports Monica
Oct 2 at 7:42
add a comment
|
3 Answers
3
active
oldest
votes
$begingroup$
Onboard batteries for DC and a ground power supply for AC.
The ground supply can come either from an airport vehicle or from the stand itself.
Since the standard AC in aviation is 115V and 400Hz, the usual ground power supply needs to be converted to a higher frequency. This used to be done with a rotating converter, i.e. a motor (at 110V and 60Hz or 220V and 50Hz) driving a generator (at 115V and 400Hz), but can probably be done with solid state electronics these days. As for why the 400Hz, there is a good answer here but it boils down to: higher frequencies can work with lighter transformers, but also radiate more, so 400Hz was chosen as a compromise.
Of course, on more advanced aircraft with weight to spare, one can find ways to convert DC into AC and viceversa. DC can be converted to AC using an inverter, while the oppoosite is achieved through a rectifier (typically the rectifier is only one component in something more elaborate like a switched-mode power supply, since by itself it would give a pretty choppy "DC")
answered Oct 2 at 7:40
AEhere supports MonicaAEhere supports Monica
6,9341 gold badge26 silver badges62 bronze badges
$endgroup$
3
$begingroup$
The batteries can also provide AC, via the on-board inverters.
$endgroup$
– Sean
Oct 2 at 22:23
2
$begingroup$
On smaller business jets, Ground Power may be in fact DC rather than AC.
$endgroup$
– selectstriker2
Oct 3 at 13:39
add a comment
|
$begingroup$
Other than the APU, there are multiple ways to provide electrical power to an aircraft:
Battery: The battery is typically the first thing you would turn on and it usually provides DC power to emergency systems only (at least on an airliner, smaller aircraft are fully powered by the battery). Running only on battery power will however deplete the battery quickly. The battery can also be used to start the APU.Ground Power: Most (maybe all) airliners can accept a connection to a Ground Power Unit (GPU), which will supply AC electrical power to run all aircraft systems on the ground. These can be either mobile units (typically powered by Diesel):
(source)or direct cable connections to the airport power grid:
(taken from this question)Engine: This would be the method of last resort, but you can run an engine to provide electrical power via its generator. Note however that starting a jet engine would typically require bleed air from the APU or an Air Start Unit (ASU). Some turboprops can run an engine with a stopped propeller to provide power (Hotel mode). The engines also provide all electrical power during the flight, which is also used to re-charge the battery.
Running an APU on the apron is typically discouraged or restricted1 by the airport because of the noise and pollution. It does however provide one advantage over ground power: the APU also supplies bleed air to the air conditioning systems. Without it, air conditioning is only possible via a Pre-Conditioned Air (PCA) hose. See What is this tube connected to a 757 for? for details.
The APU is usually switched off after starting the main engines. It can however be used in the air on some aircraft. See In what conditions is the APU used in midair? for details.
1 Some airports have restrictions on when an aircraft is allowed to run the APU, e.g. Amsterdam:
The use of aircraft APU is forbidden in these stands in the period between 2 minutes after blocks for the arrivals and 5 minutes before off blocks for departure.
The APU will still be used to start the main engines during push-back.
answered Oct 2 at 7:40
BianfableBianfable
14k55 silver badges76 bronze badges
$endgroup$
$begingroup$
Then DC batteries are recharged during flight?
$endgroup$
– AstroSharp
Oct 2 at 7:43
2
$begingroup$
Yes, whenever AC power is available (either from ground, APU generator or engine generators), it will be used to charge the battery.
$endgroup$
– Bianfable
Oct 2 at 7:43
1
$begingroup$
What's the plug look like ?!
$endgroup$
– Fattie
Oct 2 at 19:08
1
$begingroup$
@Fattie That's a nice question, you should aks it.
$endgroup$
– Bianfable
Oct 2 at 19:13
$begingroup$
@Bianfable - thanks, I did !
$endgroup$
– Fattie
Oct 2 at 19:26
|
show 1 more comment
$begingroup$
Worked at an airport for 3 years. Aircraft were either powered by battery, GPU, jet bridge, or engines. But being powered by engines presented a problem, in that all the blast zones would be deadly and severely limit what work can be done on the aircraft, if any.
Generally the procedure was to get the ground power connected as soon as the aircraft was parked. Alternatively, the pilots could use their APU, but that costs them fuel, and it's less expensive for them to have us use our fuel (though I'm sure that cost is passed into the parking fee the airline pays for each gate.) Also, working on an aircraft that had an APU running was extra loud, even with hearing protection.
answered Oct 3 at 19:47
Jonathan KuhlJonathan Kuhl
6412 silver badges4 bronze badges
$endgroup$
add a comment
|
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "528"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/4.0/"u003ecc by-sa 4.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faviation.stackexchange.com%2fquestions%2f70268%2fwhat-powers-an-aircraft-prior-to-the-apu-being-switched-on%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
3 Answers
3
active
oldest
votes
3 Answers
3
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
Onboard batteries for DC and a ground power supply for AC.
The ground supply can come either from an airport vehicle or from the stand itself.
Since the standard AC in aviation is 115V and 400Hz, the usual ground power supply needs to be converted to a higher frequency. This used to be done with a rotating converter, i.e. a motor (at 110V and 60Hz or 220V and 50Hz) driving a generator (at 115V and 400Hz), but can probably be done with solid state electronics these days. As for why the 400Hz, there is a good answer here but it boils down to: higher frequencies can work with lighter transformers, but also radiate more, so 400Hz was chosen as a compromise.
Of course, on more advanced aircraft with weight to spare, one can find ways to convert DC into AC and viceversa. DC can be converted to AC using an inverter, while the oppoosite is achieved through a rectifier (typically the rectifier is only one component in something more elaborate like a switched-mode power supply, since by itself it would give a pretty choppy "DC")
answered Oct 2 at 7:40
AEhere supports MonicaAEhere supports Monica
6,9341 gold badge26 silver badges62 bronze badges
$endgroup$
3
$begingroup$
The batteries can also provide AC, via the on-board inverters.
$endgroup$
– Sean
Oct 2 at 22:23
2
$begingroup$
On smaller business jets, Ground Power may be in fact DC rather than AC.
$endgroup$
– selectstriker2
Oct 3 at 13:39
add a comment
|
$begingroup$
Onboard batteries for DC and a ground power supply for AC.
The ground supply can come either from an airport vehicle or from the stand itself.
Since the standard AC in aviation is 115V and 400Hz, the usual ground power supply needs to be converted to a higher frequency. This used to be done with a rotating converter, i.e. a motor (at 110V and 60Hz or 220V and 50Hz) driving a generator (at 115V and 400Hz), but can probably be done with solid state electronics these days. As for why the 400Hz, there is a good answer here but it boils down to: higher frequencies can work with lighter transformers, but also radiate more, so 400Hz was chosen as a compromise.
Of course, on more advanced aircraft with weight to spare, one can find ways to convert DC into AC and viceversa. DC can be converted to AC using an inverter, while the oppoosite is achieved through a rectifier (typically the rectifier is only one component in something more elaborate like a switched-mode power supply, since by itself it would give a pretty choppy "DC")
answered Oct 2 at 7:40
AEhere supports MonicaAEhere supports Monica
6,9341 gold badge26 silver badges62 bronze badges
$endgroup$
3
$begingroup$
The batteries can also provide AC, via the on-board inverters.
$endgroup$
– Sean
Oct 2 at 22:23
2
$begingroup$
On smaller business jets, Ground Power may be in fact DC rather than AC.
$endgroup$
– selectstriker2
Oct 3 at 13:39
add a comment
|
$begingroup$
Onboard batteries for DC and a ground power supply for AC.
The ground supply can come either from an airport vehicle or from the stand itself.
Since the standard AC in aviation is 115V and 400Hz, the usual ground power supply needs to be converted to a higher frequency. This used to be done with a rotating converter, i.e. a motor (at 110V and 60Hz or 220V and 50Hz) driving a generator (at 115V and 400Hz), but can probably be done with solid state electronics these days. As for why the 400Hz, there is a good answer here but it boils down to: higher frequencies can work with lighter transformers, but also radiate more, so 400Hz was chosen as a compromise.
Of course, on more advanced aircraft with weight to spare, one can find ways to convert DC into AC and viceversa. DC can be converted to AC using an inverter, while the oppoosite is achieved through a rectifier (typically the rectifier is only one component in something more elaborate like a switched-mode power supply, since by itself it would give a pretty choppy "DC")
answered Oct 2 at 7:40
AEhere supports MonicaAEhere supports Monica
6,9341 gold badge26 silver badges62 bronze badges
$endgroup$
Onboard batteries for DC and a ground power supply for AC.
The ground supply can come either from an airport vehicle or from the stand itself.
Since the standard AC in aviation is 115V and 400Hz, the usual ground power supply needs to be converted to a higher frequency. This used to be done with a rotating converter, i.e. a motor (at 110V and 60Hz or 220V and 50Hz) driving a generator (at 115V and 400Hz), but can probably be done with solid state electronics these days. As for why the 400Hz, there is a good answer here but it boils down to: higher frequencies can work with lighter transformers, but also radiate more, so 400Hz was chosen as a compromise.
Of course, on more advanced aircraft with weight to spare, one can find ways to convert DC into AC and viceversa. DC can be converted to AC using an inverter, while the oppoosite is achieved through a rectifier (typically the rectifier is only one component in something more elaborate like a switched-mode power supply, since by itself it would give a pretty choppy "DC")
answered Oct 2 at 7:40
AEhere supports MonicaAEhere supports Monica
6,9341 gold badge26 silver badges62 bronze badges
edited Oct 3 at 11:37
answered Oct 2 at 7:40
AEhere supports MonicaAEhere supports Monica
6,9341 gold badge26 silver badges62 bronze badges
answered Oct 2 at 7:40
AEhere supports MonicaAEhere supports Monica
6,9341 gold badge26 silver badges62 bronze badges
answered Oct 2 at 7:40
AEhere supports MonicaAEhere supports Monica
6,9341 gold badge26 silver badges62 bronze badges
6,9341 gold badge26 silver badges62 bronze badges
3
$begingroup$
The batteries can also provide AC, via the on-board inverters.
$endgroup$
– Sean
Oct 2 at 22:23
2
$begingroup$
On smaller business jets, Ground Power may be in fact DC rather than AC.
$endgroup$
– selectstriker2
Oct 3 at 13:39
add a comment
|
3
$begingroup$
The batteries can also provide AC, via the on-board inverters.
$endgroup$
– Sean
Oct 2 at 22:23
2
$begingroup$
On smaller business jets, Ground Power may be in fact DC rather than AC.
$endgroup$
– selectstriker2
Oct 3 at 13:39
3
3
$begingroup$
The batteries can also provide AC, via the on-board inverters.
$endgroup$
– Sean
Oct 2 at 22:23
$begingroup$
The batteries can also provide AC, via the on-board inverters.
$endgroup$
– Sean
Oct 2 at 22:23
2
2
$begingroup$
On smaller business jets, Ground Power may be in fact DC rather than AC.
$endgroup$
– selectstriker2
Oct 3 at 13:39
$begingroup$
On smaller business jets, Ground Power may be in fact DC rather than AC.
$endgroup$
– selectstriker2
Oct 3 at 13:39
add a comment
|
$begingroup$
Other than the APU, there are multiple ways to provide electrical power to an aircraft:
Battery: The battery is typically the first thing you would turn on and it usually provides DC power to emergency systems only (at least on an airliner, smaller aircraft are fully powered by the battery). Running only on battery power will however deplete the battery quickly. The battery can also be used to start the APU.Ground Power: Most (maybe all) airliners can accept a connection to a Ground Power Unit (GPU), which will supply AC electrical power to run all aircraft systems on the ground. These can be either mobile units (typically powered by Diesel):
(source)or direct cable connections to the airport power grid:
(taken from this question)Engine: This would be the method of last resort, but you can run an engine to provide electrical power via its generator. Note however that starting a jet engine would typically require bleed air from the APU or an Air Start Unit (ASU). Some turboprops can run an engine with a stopped propeller to provide power (Hotel mode). The engines also provide all electrical power during the flight, which is also used to re-charge the battery.
Running an APU on the apron is typically discouraged or restricted1 by the airport because of the noise and pollution. It does however provide one advantage over ground power: the APU also supplies bleed air to the air conditioning systems. Without it, air conditioning is only possible via a Pre-Conditioned Air (PCA) hose. See What is this tube connected to a 757 for? for details.
The APU is usually switched off after starting the main engines. It can however be used in the air on some aircraft. See In what conditions is the APU used in midair? for details.
1 Some airports have restrictions on when an aircraft is allowed to run the APU, e.g. Amsterdam:
The use of aircraft APU is forbidden in these stands in the period between 2 minutes after blocks for the arrivals and 5 minutes before off blocks for departure.
The APU will still be used to start the main engines during push-back.
answered Oct 2 at 7:40
BianfableBianfable
14k55 silver badges76 bronze badges
$endgroup$
$begingroup$
Then DC batteries are recharged during flight?
$endgroup$
– AstroSharp
Oct 2 at 7:43
2
$begingroup$
Yes, whenever AC power is available (either from ground, APU generator or engine generators), it will be used to charge the battery.
$endgroup$
– Bianfable
Oct 2 at 7:43
1
$begingroup$
What's the plug look like ?!
$endgroup$
– Fattie
Oct 2 at 19:08
1
$begingroup$
@Fattie That's a nice question, you should aks it.
$endgroup$
– Bianfable
Oct 2 at 19:13
$begingroup$
@Bianfable - thanks, I did !
$endgroup$
– Fattie
Oct 2 at 19:26
|
show 1 more comment
$begingroup$
Other than the APU, there are multiple ways to provide electrical power to an aircraft:
Battery: The battery is typically the first thing you would turn on and it usually provides DC power to emergency systems only (at least on an airliner, smaller aircraft are fully powered by the battery). Running only on battery power will however deplete the battery quickly. The battery can also be used to start the APU.Ground Power: Most (maybe all) airliners can accept a connection to a Ground Power Unit (GPU), which will supply AC electrical power to run all aircraft systems on the ground. These can be either mobile units (typically powered by Diesel):
(source)or direct cable connections to the airport power grid:
(taken from this question)Engine: This would be the method of last resort, but you can run an engine to provide electrical power via its generator. Note however that starting a jet engine would typically require bleed air from the APU or an Air Start Unit (ASU). Some turboprops can run an engine with a stopped propeller to provide power (Hotel mode). The engines also provide all electrical power during the flight, which is also used to re-charge the battery.
Running an APU on the apron is typically discouraged or restricted1 by the airport because of the noise and pollution. It does however provide one advantage over ground power: the APU also supplies bleed air to the air conditioning systems. Without it, air conditioning is only possible via a Pre-Conditioned Air (PCA) hose. See What is this tube connected to a 757 for? for details.
The APU is usually switched off after starting the main engines. It can however be used in the air on some aircraft. See In what conditions is the APU used in midair? for details.
1 Some airports have restrictions on when an aircraft is allowed to run the APU, e.g. Amsterdam:
The use of aircraft APU is forbidden in these stands in the period between 2 minutes after blocks for the arrivals and 5 minutes before off blocks for departure.
The APU will still be used to start the main engines during push-back.
answered Oct 2 at 7:40
BianfableBianfable
14k55 silver badges76 bronze badges
$endgroup$
$begingroup$
Then DC batteries are recharged during flight?
$endgroup$
– AstroSharp
Oct 2 at 7:43
2
$begingroup$
Yes, whenever AC power is available (either from ground, APU generator or engine generators), it will be used to charge the battery.
$endgroup$
– Bianfable
Oct 2 at 7:43
1
$begingroup$
What's the plug look like ?!
$endgroup$
– Fattie
Oct 2 at 19:08
1
$begingroup$
@Fattie That's a nice question, you should aks it.
$endgroup$
– Bianfable
Oct 2 at 19:13
$begingroup$
@Bianfable - thanks, I did !
$endgroup$
– Fattie
Oct 2 at 19:26
|
show 1 more comment
$begingroup$
Other than the APU, there are multiple ways to provide electrical power to an aircraft:
Battery: The battery is typically the first thing you would turn on and it usually provides DC power to emergency systems only (at least on an airliner, smaller aircraft are fully powered by the battery). Running only on battery power will however deplete the battery quickly. The battery can also be used to start the APU.Ground Power: Most (maybe all) airliners can accept a connection to a Ground Power Unit (GPU), which will supply AC electrical power to run all aircraft systems on the ground. These can be either mobile units (typically powered by Diesel):
(source)or direct cable connections to the airport power grid:
(taken from this question)Engine: This would be the method of last resort, but you can run an engine to provide electrical power via its generator. Note however that starting a jet engine would typically require bleed air from the APU or an Air Start Unit (ASU). Some turboprops can run an engine with a stopped propeller to provide power (Hotel mode). The engines also provide all electrical power during the flight, which is also used to re-charge the battery.
Running an APU on the apron is typically discouraged or restricted1 by the airport because of the noise and pollution. It does however provide one advantage over ground power: the APU also supplies bleed air to the air conditioning systems. Without it, air conditioning is only possible via a Pre-Conditioned Air (PCA) hose. See What is this tube connected to a 757 for? for details.
The APU is usually switched off after starting the main engines. It can however be used in the air on some aircraft. See In what conditions is the APU used in midair? for details.
1 Some airports have restrictions on when an aircraft is allowed to run the APU, e.g. Amsterdam:
The use of aircraft APU is forbidden in these stands in the period between 2 minutes after blocks for the arrivals and 5 minutes before off blocks for departure.
The APU will still be used to start the main engines during push-back.
answered Oct 2 at 7:40
BianfableBianfable
14k55 silver badges76 bronze badges
$endgroup$
Other than the APU, there are multiple ways to provide electrical power to an aircraft:
Battery: The battery is typically the first thing you would turn on and it usually provides DC power to emergency systems only (at least on an airliner, smaller aircraft are fully powered by the battery). Running only on battery power will however deplete the battery quickly. The battery can also be used to start the APU.Ground Power: Most (maybe all) airliners can accept a connection to a Ground Power Unit (GPU), which will supply AC electrical power to run all aircraft systems on the ground. These can be either mobile units (typically powered by Diesel):
(source)or direct cable connections to the airport power grid:
(taken from this question)Engine: This would be the method of last resort, but you can run an engine to provide electrical power via its generator. Note however that starting a jet engine would typically require bleed air from the APU or an Air Start Unit (ASU). Some turboprops can run an engine with a stopped propeller to provide power (Hotel mode). The engines also provide all electrical power during the flight, which is also used to re-charge the battery.
Running an APU on the apron is typically discouraged or restricted1 by the airport because of the noise and pollution. It does however provide one advantage over ground power: the APU also supplies bleed air to the air conditioning systems. Without it, air conditioning is only possible via a Pre-Conditioned Air (PCA) hose. See What is this tube connected to a 757 for? for details.
The APU is usually switched off after starting the main engines. It can however be used in the air on some aircraft. See In what conditions is the APU used in midair? for details.
1 Some airports have restrictions on when an aircraft is allowed to run the APU, e.g. Amsterdam:
The use of aircraft APU is forbidden in these stands in the period between 2 minutes after blocks for the arrivals and 5 minutes before off blocks for departure.
The APU will still be used to start the main engines during push-back.
answered Oct 2 at 7:40
BianfableBianfable
14k55 silver badges76 bronze badges
edited Oct 2 at 22:21
answered Oct 2 at 7:40
BianfableBianfable
14k55 silver badges76 bronze badges
answered Oct 2 at 7:40
BianfableBianfable
14k55 silver badges76 bronze badges
answered Oct 2 at 7:40
BianfableBianfable
14k55 silver badges76 bronze badges
14k55 silver badges76 bronze badges
$begingroup$
Then DC batteries are recharged during flight?
$endgroup$
– AstroSharp
Oct 2 at 7:43
2
$begingroup$
Yes, whenever AC power is available (either from ground, APU generator or engine generators), it will be used to charge the battery.
$endgroup$
– Bianfable
Oct 2 at 7:43
1
$begingroup$
What's the plug look like ?!
$endgroup$
– Fattie
Oct 2 at 19:08
1
$begingroup$
@Fattie That's a nice question, you should aks it.
$endgroup$
– Bianfable
Oct 2 at 19:13
$begingroup$
@Bianfable - thanks, I did !
$endgroup$
– Fattie
Oct 2 at 19:26
|
show 1 more comment
$begingroup$
Then DC batteries are recharged during flight?
$endgroup$
– AstroSharp
Oct 2 at 7:43
2
$begingroup$
Yes, whenever AC power is available (either from ground, APU generator or engine generators), it will be used to charge the battery.
$endgroup$
– Bianfable
Oct 2 at 7:43
1
$begingroup$
What's the plug look like ?!
$endgroup$
– Fattie
Oct 2 at 19:08
1
$begingroup$
@Fattie That's a nice question, you should aks it.
$endgroup$
– Bianfable
Oct 2 at 19:13
$begingroup$
@Bianfable - thanks, I did !
$endgroup$
– Fattie
Oct 2 at 19:26
$begingroup$
Then DC batteries are recharged during flight?
$endgroup$
– AstroSharp
Oct 2 at 7:43
$begingroup$
Then DC batteries are recharged during flight?
$endgroup$
– AstroSharp
Oct 2 at 7:43
2
2
$begingroup$
Yes, whenever AC power is available (either from ground, APU generator or engine generators), it will be used to charge the battery.
$endgroup$
– Bianfable
Oct 2 at 7:43
$begingroup$
Yes, whenever AC power is available (either from ground, APU generator or engine generators), it will be used to charge the battery.
$endgroup$
– Bianfable
Oct 2 at 7:43
1
1
$begingroup$
What's the plug look like ?!
$endgroup$
– Fattie
Oct 2 at 19:08
$begingroup$
What's the plug look like ?!
$endgroup$
– Fattie
Oct 2 at 19:08
1
1
$begingroup$
@Fattie That's a nice question, you should aks it.
$endgroup$
– Bianfable
Oct 2 at 19:13
$begingroup$
@Fattie That's a nice question, you should aks it.
$endgroup$
– Bianfable
Oct 2 at 19:13
$begingroup$
@Bianfable - thanks, I did !
$endgroup$
– Fattie
Oct 2 at 19:26
$begingroup$
@Bianfable - thanks, I did !
$endgroup$
– Fattie
Oct 2 at 19:26
|
show 1 more comment
$begingroup$
Worked at an airport for 3 years. Aircraft were either powered by battery, GPU, jet bridge, or engines. But being powered by engines presented a problem, in that all the blast zones would be deadly and severely limit what work can be done on the aircraft, if any.
Generally the procedure was to get the ground power connected as soon as the aircraft was parked. Alternatively, the pilots could use their APU, but that costs them fuel, and it's less expensive for them to have us use our fuel (though I'm sure that cost is passed into the parking fee the airline pays for each gate.) Also, working on an aircraft that had an APU running was extra loud, even with hearing protection.
answered Oct 3 at 19:47
Jonathan KuhlJonathan Kuhl
6412 silver badges4 bronze badges
$endgroup$
add a comment
|
$begingroup$
Worked at an airport for 3 years. Aircraft were either powered by battery, GPU, jet bridge, or engines. But being powered by engines presented a problem, in that all the blast zones would be deadly and severely limit what work can be done on the aircraft, if any.
Generally the procedure was to get the ground power connected as soon as the aircraft was parked. Alternatively, the pilots could use their APU, but that costs them fuel, and it's less expensive for them to have us use our fuel (though I'm sure that cost is passed into the parking fee the airline pays for each gate.) Also, working on an aircraft that had an APU running was extra loud, even with hearing protection.
answered Oct 3 at 19:47
Jonathan KuhlJonathan Kuhl
6412 silver badges4 bronze badges
$endgroup$
add a comment
|
$begingroup$
Worked at an airport for 3 years. Aircraft were either powered by battery, GPU, jet bridge, or engines. But being powered by engines presented a problem, in that all the blast zones would be deadly and severely limit what work can be done on the aircraft, if any.
Generally the procedure was to get the ground power connected as soon as the aircraft was parked. Alternatively, the pilots could use their APU, but that costs them fuel, and it's less expensive for them to have us use our fuel (though I'm sure that cost is passed into the parking fee the airline pays for each gate.) Also, working on an aircraft that had an APU running was extra loud, even with hearing protection.
answered Oct 3 at 19:47
Jonathan KuhlJonathan Kuhl
6412 silver badges4 bronze badges
$endgroup$
Worked at an airport for 3 years. Aircraft were either powered by battery, GPU, jet bridge, or engines. But being powered by engines presented a problem, in that all the blast zones would be deadly and severely limit what work can be done on the aircraft, if any.
Generally the procedure was to get the ground power connected as soon as the aircraft was parked. Alternatively, the pilots could use their APU, but that costs them fuel, and it's less expensive for them to have us use our fuel (though I'm sure that cost is passed into the parking fee the airline pays for each gate.) Also, working on an aircraft that had an APU running was extra loud, even with hearing protection.
answered Oct 3 at 19:47
Jonathan KuhlJonathan Kuhl
6412 silver badges4 bronze badges
answered Oct 3 at 19:47
Jonathan KuhlJonathan Kuhl
6412 silver badges4 bronze badges
answered Oct 3 at 19:47
Jonathan KuhlJonathan Kuhl
6412 silver badges4 bronze badges
answered Oct 3 at 19:47
Jonathan KuhlJonathan Kuhl
6412 silver badges4 bronze badges
6412 silver badges4 bronze badges
add a comment
|
add a comment
|
Thanks for contributing an answer to Aviation Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faviation.stackexchange.com%2fquestions%2f70268%2fwhat-powers-an-aircraft-prior-to-the-apu-being-switched-on%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
6
$begingroup$
Don't rush to accept, usually waiting 24 hours is recommended so all timezones can see and answer the question.
$endgroup$
– AEhere supports Monica
Oct 2 at 7:42